Table of Contents
Advertisement
5.3 Data exchange between paperless recorder and PC
The exchange of configuration data between the recorder and a PC (setup
program) is carried out via a 3.5" diskette, or data transfer using the setup in-
terface.
5.3.1 Data transfer via diskette
h Make the settings in the setup program.
➔
PC
paperless
recorder
h Write the settings to diskette by using the Data transfer
h Insert the diskette into the recorder
h Call up the Disk manager menu on the recorder.
h Select function Diskette ➔ Config. data and activate
After the configuration has been successfully read in, the recorder will be auto-
matically reset. If the measurement data diskette has been removed, a new
diskette should be inserted.
H
H
h Insert diskette into the recorder
Paperless
➔
recorder
PC
h Call up the Disk manager menu on the recorder.
h Select function Config. data
h After a successful transfer, the diskette can be inserted into the PC.
h Using the menu Data transfer
Import/export
If errors during transfer from and to diskette occur on the recorder side, these
errors
will be indicated in the disk manager menu and will remain so until the error
has been rectified or is overwritten with fresh error messages.
H
A
All manuals and user guides at all-guides.com
diskette menu, or by activating the
(remove the measurement data diskette first, if necessary).
The measurement data on the diskette will be overwritten
by a new configuration.
Do not use the menu function "File ➔ Save as...".
It cannot be used to create a valid diskette for the recorder.
vating the
button, the data can be read into the setup program.
A diskette containing configuration data must not
have other files on it.
The diskette has to be formatted before use. It must not contain any data
or faulty sectors. If this is disregarded, a fault-free data exchange cannot
be ensured.
5 Setup program
button.
➔
Diskette and activate
➔
Data import from diskette menu or by acti-
➔
Data export to
.
.
67
Advertisement
Table of Contents
