Table of Contents
Advertisement
Enter set boot_reset on to initialize the system before booting.
1'
If you boot from the same boot device each time, you can store the
2
disk name by defining the default boot device. This is done by using
the set bootdef_dev command. The default boot device is used for
booting during power-up and auto restarts.
Use set boot_osflags to define the boot command flag parameters of
3
0, 6. Note the flags shown here are for OpenVMS; UNIX uses differ-
ent flags.
Booting can now be done from that device by typing boot or just b.
4
NOTE: Refer to the Operations Manual for more information on set com-
mands and environment variables.
Diagnostics and Utilities 7-27
Advertisement
Table of Contents
