Table of Contents
Advertisement
When the system powers up, self-test runs. Verify that all tests have
1
passed by checking the results in the self-test display.
Use the show configuration and show device commands to deter-
2
mine the self-test status for the I/O adapters and devices. Identify the
load device. Note what the console configures.
Check that the console configured all the hardware on the system.
3
Troubleshoot and repair if necessary.
Run configuration utilities if necessary.
4
Boot the factory installed operating system.
5
Verify the system under the installed operating system.
6
Diagnostics and Utilities 7-5
Advertisement
Table of Contents
Need help?
Do you have a question about the AlphaServer 8200 and is the answer not in the manual?
Questions and answers