Table of Contents
Advertisement
1.
Locate the L-shaped multi-cabinet securing brackets (PN 74-49873-01)
in the expander cabinet installation kit.
2.
The two securing brackets are placed on the top corners of the side
panels of adjacent cabinets. See Figure 3-5. The brackets are tight
and require some force to install. If the cabinets are not snug against
each other, the brackets will not fit and could damage the sides of the
cabinets. Position the brackets as shown in Figure 3-5; the longer part
of the bracket secures the edge of the cabinet sides and the shorter
part of the bracket secures the top of the cabinet sides.
3.
Repeat step 2 if there is a second expander cabinet.
Installing an Expander Cabinet 3-9
Advertisement
Table of Contents
Need help?
Do you have a question about the AlphaServer 8200 and is the answer not in the manual?
Questions and answers