Table of Contents
Advertisement
The two stabilizing brackets must be bolted to the cabinet frame at the
front and the back of the machine.
1.
Get the stabilizing brackets from the accessories box. (PN 74-49866)
2.
Open the front door and install one bracket at the front of the system
using two of the 6mm screws that come with the brackets. See Figure
2-5.
3.
Move to the back of the system and install the other bracket as you did
in step 2. You do not have to remove the back panel for this proce-
dure.
Installing the System Cabinet 2-13
Advertisement
Table of Contents
