Table of Contents
Advertisement
1.
Use an adjustable wrench to lower and adjust the leveler feet. A ship-
ping bracket can also be used to adjust the leveler feet, since the
bracket cutout and leveler feet hexnuts are the same size.
2.
Use a bubble level while adjusting the feet and make sure all cabinets
are properly leveled in three dimensions (top to bottom, side to side,
and front to back). The operation is complete when the tops are level
and the sides of the cabinets are snug, top to bottom, front to back.
3.
Once the cabinets are level, lock each of the feet into place by tighten-
ing the locknut at the top of each leveler foot.
Installing an Expander Cabinet 3-7
Advertisement
Table of Contents
