Table of Contents
Advertisement
1.
Using an adjustable wrench, lower and adjust the leveler feet at each
corner of the system. (A shipping bracket can also be used to lower
the leveler feet. The bracket cutout and leveler feet hexnuts are the
same size.)
2.
Using a bubble level, check to see that the cabinet is properly leveled
(side to side and front to back).
3.
Once the cabinet is level, lock each of the feet into place by tightening
the locknut at the top of each leveler foot.
Installing the System Cabinet 2-11
Advertisement
Table of Contents
Need help?
Do you have a question about the AlphaServer 8200 and is the answer not in the manual?
Questions and answers