Booting Digital Unix From A Cd-Rom; Cd-Rom Unix Boot - DEC AlphaServer 8200 Installation Manual

7.11 Booting Digital UNIX from a CD-ROM

This section shows a sample boot of UNIX from the CD-ROM
drive. The first step is to issue the show device command to de-
termine the mnemonic of the CD drive.
Example 7-9

CD-ROM UNIX Boot

p08>>> show device
polling for units on isp0, slot 0, bus 0, hose0...
dka200.2.0.0.0 DKA200
polling for units on isp1, slot 1, bus 0, hose0...
polling for units on isp2, slot 4, bus 0, hose0...
polling for units on isp3, slot 5, bus 0, hose0...
dkd400.4.0.5.0 DKD400
dkd500.5.0.5.0 DKD500
P08>>> boot dkd400.4.0.5.0 -fl a
(boot dkd400.4.0.5.0 -flags a)
SRM boot identifier: scsi 4 5 0 0 400 ef00 10201077
boot adapter: isp3 rev 0 in bus slot 5 off of kftia0 in TLSB slot 8
block 0 of dkd400.4.0.5.0 is a valid boot block
reading 16 blocks from dkd400.4.0.5.0
bootstrap code read in
base = 200000, image _start = 0, image_bytes = 2000
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OSF Boot - Thu Feb 2 18:13:26 EST 1995
Loading vmunix...
[I/O subsystem reset information, memory information
displayed, I/O bus adapters displayed, configured devices
displayed, network configuration information displayed]
The system is ready.
DEC UNIX Version 3.2B
login:
7-24 Diagnostics and Utilities
1
2
3
(oregon.acb.exz.dec.com) console
RZ26L 440C
RRD44 0000
RZ26L 440C