Table of Contents
Advertisement
Show device displays information about each I/O device. Polling
1
checks the KFTIA for device configurations. The next line contains
four columns. The first column contains the device type and unit
number, node number, device channel number, the internal PCI
node number, and I/O channel number, separated by periods. The
second column displays the name of the device given by the device
controller. The third column shows the device type, and the fourth
column shows the revision of the device. The CD drive in this case is
the RRD44 and its mnemonic is DKD400.
In the boot command, dk is the device code of the boot device, d is
2
the boot device controller designation, and 400 specifies the hexa-
decimal unit number of the boot device. The 4 is the node number,
0 is the channel number, 5 is the PCI node number, and 0 is the
I/O channel number. The -fl a causes UNIX to come up in multiuser
mode.
The system boots from the CD-ROM.
3
After the system is configured, the operating system banner appears,
4
and the user is given the login: prompt.
For more information:
DEC OSF/1 Guide to System Administration
Diagnostics and Utilities 7-25
Advertisement
Table of Contents
