Manual Configuration - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE

Manual Configuration

1. Select the index in BlemishCompensationIndex. You can select from 1 to 2000. However,
configure the indexes in order starting with the smallest index. If you skip indexes while
configuring settings, interpolation may not be performed.
2. Specify the pixel points for interpolation using the BlemishCompensationPositionX and
BlemishCompensationPositionY settings.
Notes:
You can configure values that are within the total effective pixel area. Specify pixels for
l
which interpolation is not necessary as -1. If 0 is specified, the first line or first pixel will
be interpolated.
To delete the configured pixel points, execute BlemishCompensationDataClear with
l
the corresponding index selected.
3. Execute BlemishStore. Blemish compensation data will be stored.
4. Set BlemishEnable to Enable, and execute interpolation. If it is set to Disable all, all
interpolation for defective pixels will be disabled (including the factory-set interpolation data). If
set to Disable user detection, the factory-set interpolation data remains valid, and only the
interpolation data registered in BlemishCompensationIndex is disabled.
User Manual (Ver. 1.0) - Main Functions
- 86 -