Image Scaling Mode (Xscale) - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE

Image Scaling Mode (Xscale)

Related Setting Items:
JAI's Xscale algorithm digitally reduces the sensor's pixel resolution by specifying the vertical and
horizontal scaling ratio. This function can also be used for color models and allows finer adjustment of
resolution than the conventional
The output image types are Average or Sum.
Notes:
When using this function with the
l
OffsetX, and OffsetY settings, and then configure the Image Scaling Mode settings.
Refer to Functions That Cannot Be Used Together
l
How To Configure
1. If necessary, configure the
2. Set ImageScalingMode (ImageFormatControl) to On.
3. Use ImageScalingSumMode to specify the output image mode. The options are "Average
(Off)" or "Sum (On)." Depending on the mode, the output image's brightness will be different.
Average Mode: The average brightness of the sensor image is equal to the average brightness
of the reduced output image.
Sum Mode: The sum of the brightness of all pixels in the sensor image and the sum of the
brightness of all pixels in the reduced output image is equal, thus increasing the brightness of the
output image.
ImageFormatControl
Binning Function.
ROI Function (Single
ROI Function (Single ROI)
User Manual (Ver. 1.0) - Main Functions
ROI), first, set the Width, Height,
for usage restrictions.
settings.
- 90 -