Configuring The Gpio Module (Register Settings); Input/Output Signal Selector; Examples Of The Pulse Generator Configuration; Setting Screen Of The Pulse Generator - JAI CM-200GE User Manual

CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA

6.4. Configuring the GPIO module (register settings)

6.4.1 Input/Output Signal Selector

Line selector
This sets the input and output to the external equipment. Line 3 through line 6 are already
allocated as below.
Line source
This sets which signal can be fed through selected output, external or internal.
6.5.

Examples of the pulse generator configuration

6.5.1 Setting screen of the pulse generator

- 17 -