Pulsegenerator - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE

PulseGenerator

Configure pulse generator settings.
Related Topic: Pulse Generator
Pulse Generator Item
ClockPreScaler
PulseGeneratorClock (MHz)
PulseGeneratorSelector
PulseGeneratorLength
PulseGeneratorLengthMs
(ms)
PulseGeneratorFrequency
(Hz)
PulseGeneratorStartPoint
PulseGeneratorStartPointMs
(ms)
Setting Range Default Value
1 ~ 4096 297
- 0.25
0:PulseGenerator0
1:PulseGenerator1
0:PulseGenerator0
2:PulseGenerator2
3:PulseGenerator3
1 ~ 1048575 25000
- 100
- 10
0 ~ 1048575 0
- 0
Set the division value for the prescaler (12 bit) using
PixelClock as the base clock.
Set the clock used for the pulse generator. This value
is calculated using the [ClockPreScaler] value as a
base.
PulseGeneratorClock = SrcFreq / ClockPreScaler
SrcFreq:74.25
Select the pulse generator.
Set the maximum count-up value as a clock count.
Set the maximum count-up value in milliseconds.
This value is calculated using the
PulseGeneratorLength value as a base. The setting
range varies depending on the ClockPreScaler value.
PulseGeneratorLengthMs = 1/PulseGeneratorClock *
PulseGeneratorLength
Set the maximum count-up value as a frequency.
This value is calculated using the
PulseGeneratorLength value as a base.
PulseGeneratorFrequency = 1sec /
PulseGeneratorLengthMs
Set the start point of the High interval as a clock count.
When the counter reaches this value, the output will be
1.
Set the start point of the High interval in milliseconds.
When the counter reaches this value, the output will be
1. The setting range varies depending on the
ClockPreScaler value.
PulseGeneratorStartPointMs =
1/PulseGeneratorClock * PulseGeneratorStartPoint
- 138 -
User Manual (Ver. 1.0) - Setting List
Description