Roi Function (Multi Roi) - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
ROI Function (Multi ROI)
Related Setting Items:
Notes:
Refer to Functions That Cannot Be Used Together
l
If this function is turned on while
l
forced to Off.
In Multi ROI mode, you can specify up to 64 scanning areas for a single-frame image. By skipping
areas that are not specified as regions of interest when scanning a frame, the ROI function outputs the
specified regions in a combined state. You can increase the frame rate due to the reduced scanning
time for the combined areas. However, you cannot increase the frame rate by compressing in the
horizontal direction.
How to Configure
1. Set MultiRoiMode (MultiROIControl) to On.
2. Select from the eight indexes in MultiRoiIndex then set MultiRoiWidth, MultiRoiHeight,
MultiRoiOffsetX, and MultiRoiOffsetY.
3. Set the maximum index number to be enabled to MultiRoiVerticalEnableNumber and
MultiRoiHorizontalEnableNumber.
MultiROIControl
Shading Correction
User Manual (Ver. 1.0) - Main Functions
for usage restrictions.
is set to On, Shading Correction will be
- 100 -