To Use The Shading Correction Function - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Cautions:
For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is
l
limited to 8 times the amount of gain before correction. (The amount of gain cannot be
increased to more than 8 times the amount of gain from before correction.)
If the area in the screen with the highest brightness level is 1000 LSB or higher (during 10-bit
l
video output), or if the lowest brightness level is less than 45 LSB (during 10-bit video
output), proper correction is not possible.

To Use the Shading Correction Function

Configure the settings as follows.
Item
ShadingCorrectionMode
ShadingMode
Display a white chart under a uniform light, and execute PerformShadingCalibration.
Notes:
After shading correction is executed, the shading correction value is automatically saved to
l
the user area selected in ShadingMode.
The PerformShadingCalibration command cannot be executed under the following
l
conditions. (An error also occurs when ShadingMode is set to Off).
- When outputting no image.
- When outputting TestPattern.
- Width and/or Height are less than 512
- In FD2x2Binning mode
- In ImageScaling mode
- In Decimation mode
- In Sequencer mode
- In MultiRoi mode
- In Reverse mode
- In GradationCompression mode
- In ALC mode
- AcquisitionMode is set to other than Continuous (AcquisitionControl)
Setting Value
FlatShading,
ColorShading
User1, User2, User3,
Off
(Binning Function)
(Image Scaling Mode
(Decimation Mode)
(Sequencer Function)
(ROI Function (Multi
(Image Flip Function)
(Gradation Compression
(ALC (Automatic Level Control)
Select the shading correction mode.
Select the user area to which to save the shading
correction value.
(ROI Function (Single ROI))
(Xscale))
ROI))
Mode)
Function)
- 88 -
User Manual (Ver. 1.0) - Main Functions
Description