Sequencercontrol - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Blemish Control Item
BlemishCompensation
PositionX
BlemishCompensation
PositionY
BlemishCompensation
DataClear
BlemishCompensationNumber

SequencerControl

Configure sequencer settings.
Related Topic: Sequencer Function
Note: Refer to Functions That Cannot Be Used Together
Sequencer Control Item
SequencerMode
SequencerModeSelect
SequencerSetSelector
SequencerWidth
Setting Default
Range Value
Display the X coordinate (horizontal pixel position) of the target blemish
selected in BlemishCompensationIndex. You can also manually enter the
X coordinate of the blemish you want to correct.
- -1
Min: -1
Max: WidthMax - 1
Display the Y coordinate (vertical pixel position) of the target blemish
selected in BlemishCompensationIndex. You can also manually enter the
Y coordinate of the blemish you want to correct.
- -1
Min: -1
Max: HeightMax - 1
Delete detected or specified blemish information selected in
- -
BlemishCompensationIndex.
0 ~ 2000 0 Display the number of target blemishes.
Setting Default
Range Value
0: Off
0: Off Enable/disable SequencerMode.
1: On
Select the sequencer mode.
- 0
0: TriggerSequencerMode (Default)
1: CommandSequencerMode
1 ~ 32 1 Select the index number to configure.
Set the width of the selected SequencerIndex.
WidthMax Setting Range: 96 (48)* ~ [WidthMax - OffsetX] , Step 8(4)*
-
value
*For monochrome models, when BinningHorizontal = 2 or
FD2x2BinningMode = On, the value in parentheses is applicable.
for usage restrictions.
- 149 -
User Manual (Ver. 1.0) - Setting List
Description
Description