Table of Contents
Advertisement
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Usage Precautions
Notes on Supplying Power via PoE
The use of the PoE function results in higher power consumption and more heat generation than when
power is supplied via the 6-pin connector. Therefore, the PoE function should only be used if steps are
taken to ensure that excess heat does not create a safety hazard or cause damage to the camera.
Specifically, PoE should only be used when one of the two following operating conditions is met:
The camera is outfitted with the JAI Heatsink set (sold separately).
l
or
The camera is operated with a limited LAN cable length and frame rate as specified below.
l
Cautions:
The camera warranty does not cover the use of the PoE function unless one of the two
l
specified operating conditions is met.
Even under specified operating conditions, the camera housing and heatsink surface
l
temperatures can reach 76°C at room temperature. Please take sufficient safety measures
to guard against serious injuries (burns).
Operating Condition Option 1: Attach the Heatsink Set
When operating this camera using PoE, attach the heatsink set (sold separately) to the camera.
When the heatsink set is properly attached, there are no limitations on the LAN cable length and/or the
frame rate.
Notes:
For details on how to attach the heatsink set, see
l
via PoE)
in the Preparation chapter.
Regarding the heatsink set's performance, see Appendix.
l
User Manual (Ver. 1.0) - Usage Precautions
② Heatsink Set (When Supplying Power
- 14 -
Advertisement
Table of Contents
