JAI GOX-5105M-5GE User Manual

Cmos digital progressive scan monochrome and color camera with gige interface

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

Table of Contents

Quick Links

Download this manual

User Manual

Thank you for purchasing this product.

Be sure to read this documentation before use.

This documentation includes important safety precautions and instructions on how to operate the unit. Be sure to read this documentation to ensure

proper operation.

The contents of this documentation are subject to change without notice for the purpose of improvement.

GOX-5105M-5GE

GOX-8105M-5GE

GOX-12405M-5GE

GOX-16205M-5GE

GOX-20405M-5GE

GOX-24505M-5GE

Monochrome and Color Camera with GigE Interface

Go-X_Series_5GE_Manual_Ver.1.0_2023-03-07

GOX-5105C-5GE

GOX-8105C-5GE

GOX-12405C-5GE

GOX-16205C-5GE

GOX-20405C-5GE

GOX-24505C-5GE

CMOS Digital Progressive Scan

Document Version: 1.0

Table of Contents

Summary of Contents for JAI GOX-5105M-5GE

Page 1 This documentation includes important safety precautions and instructions on how to operate the unit. Be sure to read this documentation to ensure proper operation. The contents of this documentation are subject to change without notice for the purpose of improvement. © 2023 JAI...
Page 2: Table Of Contents
User Manual (Ver. 1.0) - Table of Contents GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Table of Contents Table of Contents About Technical Note Notice/Warranty/Certifications Notice Warranty Certifications CE Compliance Warning Supplement Supplement Package Contents, Accessories Usage Precautions Notes on Supplying Power via PoE Notes on Cable Configurations...
Page 3 User Manual (Ver. 1.0) - Table of Contents GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Recommended Circuit Diagram (Reference Examples) Recommended External Input Circuit Diagram Recommended External Output Circuit Diagram Characteristics of the Recommended Circuits for Opto OUT Preparation Step 1: Install the Software (First Time Only) Step 2: Connect Devices...
Page 4 1. Calculate the H Period 2. Calculate the Minimum Frame Period 3. Calculate the Maximum Frame Rate or Maximum Trigger Rate Timing Chart Exposure Mode = Timed (Overlap Readout) GOX-5105M-5GE, GOX-5105C-5GE GOX-8105M-5GE, GOX-8105C-5GE GOX-12405M-5GE, GOX-12405C-5GE GOX-16205M-5GE, GOX-16205C-5GE GOX-20405M-5GE, GOX-20405C-5GE GOX-24505M-5GE, GOX-24505C-5GE...
Page 5 User Manual (Ver. 1.0) - Table of Contents GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Gain Control Automatic Gain Level Control White Balance Color Temperature ALC (Automatic Level Control) Function To Use the ALC Function Gamma Function To Use the Gamma Function LUT (Lookup Table) To Use the LUT Function...
Page 6 User Manual (Ver. 1.0) - Table of Contents GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE CommandSequencer Mode Pulse Generator Counter and Timer Control Function Counter Occurrence Diagram Internal Camera Blocks To Use the Counter Function Action Control Function Action Control Example Chunk Data Function Event Control Function...
Page 7 ChunkDataControl TestControl UserSetControl Miscellaneous Troubleshooting Power Supply and Connections Image Display Settings and Operations Specifications Spectral Response (GOX-5105M-5GE/GOX-5105C-5GE) Spectral Response (GOX-8105M-5GE/GOX-8105C-5GE) Spectral Response (GOX-12405M-5GE/GOX-12405C-5GE) Spectral Response (GOX-16205M-5GE/GOX-16205C-5GE) Spectral Response (GOX-20405M-5GE/GOX-20405C-5GE) Spectral Response (GOX-24505M-5GE/GOX-24505C-5GE) Dimensions Camera Heatsink Set (HS-02) Heatsink Set (HS-02) with the Camera...
Page 8: About Technical Note
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE About Technical Note Some additional technical information is provided on the JAI website as Technical Notes. In this manual, if a technical note is available for a particular topic, the above icon is shown. Please refer to the following URL for Technical notes.
Page 9: Notice/Warranty/Certifications
The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan, and may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of its product and assumes no responsibility for any errors which may appear or for damages resulting from the use of the information contained herein.
Page 10: Warning
User Manual (Ver. 1.0) - Notice/Warranty/Certifications GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning Changes or modifications to this unit not expressly approved by the party responsible for FCC compliance could void the user’s authority to operate the equipment.
Page 11: Supplement
Pollution by Electronic Information Products “, known as “China RoHS“. The table shows contained Hazardous Substances in this camera. mark shows that the environment-friendly use period of contained Hazardous Substances is 15 years. Applicable models: GOX-5105M-5GE, GOX-8105M-5GE, GOX-12405M-5GE, GOX-16205M- 5GE, GOX-20405M-5GE, GOX-24505M-5GE 重要注意事项有毒，有害物质或元素名称及含量表...
Page 12: Supplement
User Manual (Ver. 1.0) - Notice/Warranty/Certifications GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Supplement The following statement is related to the regulation on “Measures for the Administration of the Control of Pollution by Electronic Information Products “, known as “China RoHS“. The table shows contained Hazardous Substances in this camera.
Page 13: Package Contents, Accessories
User Manual (Ver. 1.0) - Package Contents, Accessories GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Package Contents, Accessories Camera (1) Sensor protection cap (1) Dear customer (sheet) (1) Optional Accessories (Sold Separately) Note: The tripod adapter plate and the heatsink set cannot be used together. When using a tripod with the heatsink set attached to the camera, use the tripod screw hole on the bottom of the heatsink.
Page 14: Usage Precautions
Specifically, PoE should only be used when one of the two following operating conditions is met: The camera is outfitted with the JAI Heatsink set (sold separately). The camera is operated with a limited LAN cable length and frame rate as specified below.
Page 15: Notes On Cable Configurations
User Manual (Ver. 1.0) - Usage Precautions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Operating Condition Option 2: Limit the LAN Cable Length and Frame Rate (without Heatsink set) When operating this camera using PoE without attaching the heatsink set, the following conditions must be strictly observed.
Page 16: Notes On Attaching The Lens
User Manual (Ver. 1.0) - Usage Precautions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Notes on Attaching the Lens How to Clean a Sensor Avoiding Dust Particles When attaching the lens to the camera, stray dust and other particles may adhere to the sensor surface and rear surface of the lens.
Page 17: Phenomena Specific To Cmos Image Sensors
User Manual (Ver. 1.0) - Usage Precautions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Phenomena Specific to CMOS Image Sensors The following phenomena are known to occur on cameras equipped with CMOS image sensors. These do not indicate malfunctions. Aliasing: When shooting straight lines, stripes, and similar patterns, vertical aliasing (zigzag distortion) may appear on the monitor.
Page 18: Features
Max Frame Rate* Model Name Image Sensor Active Pixels Pixel Size (6-pin Power Supply) GOX-5105M-5GE Mono Type 1/1.8 2472 x 2064 2.74 μm x 2.74 μm 112 fps GOX-5105C-5GE...
Page 19 User Manual (Ver. 1.0) - Features GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Compact size with excellent shock and vibration resistance PoE or via separate 6-pin connector Caution: Notes on Supplying Power via PoEwhen the camera is operating with a PoE power supply.
Page 20: Parts Identification
User Manual (Ver. 1.0) - Parts Identification GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Parts Identification ① Lens Mount (C-Mount) ② RJ-45 Connector ③ LINK LED ④ ACT LED ⑤ POWER/TRIG LED ⑥ DC IN/TRIG Connector (6-Pin Round) ⑦...
Page 21: ② Rj-45 Connector
User Manual (Ver. 1.0) - Parts Identification GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ② RJ-45 Connector Connect a Gigabit Ethernet compatible LAN cable (Category 5e or higher, Category 6 recommended) here. GigE Vision Interface Signal TRD+ (0) TRD- (0) TRD+ (1)
Page 22: ⑤ Power/Trig Led
User Manual (Ver. 1.0) - Parts Identification GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ⑤ POWER/TRIG LED Indicates the power or trigger input status. Status Lit amber Camera initializing Lit green Camera in operation During operation in trigger mode, trigger signals are being input. Blinking Note: The blinking interval is not related to the actual input interval of the external green...
Page 23: ⑦ ⑧ Mounting Holes
User Manual (Ver. 1.0) - Parts Identification GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ⑦ ⑧ Mounting Holes Use these holes when mounting the camera directly to a wall or other structural system. ⑦ Upper part of camera: M3, 3mm depth, 20mm pitch ⑧...
Page 24: Characteristics Of The Recommended Circuits For Opto Out
User Manual (Ver. 1.0) - Parts Identification GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Characteristics of the Recommended Circuits for Opto OUT OUTPUT LINE RESPONSE TIME For the operating conditions of applied voltage (User Power) +12V, load resistance 10kΩ, and cable length 1m, the timing is shown in the table below.
Page 25: Preparation
Read this section to learn how the camera connects to devices and accessories. The preparation process is described below. Step 1: Install the Software (First Time Only) Install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer. Step 2: Connect Devices Verify whether the camera is turned on and ready for use.
Page 26: Step 1: Install The Software (First Time Only)
When using the camera for the first time, install the software for configuring and controlling the camera (eBUS SDK for JAI) on the computer. Note: When you install eBUS SDK for JAI, eBUS Player for JAI will also be installed. 1. Download the eBUS SDK for JAI from the JAI website (https://www.jai.com/support-software/jai-...
Page 27: ① Lens
C-mount lenses with lens mount protrusions of 9 mm or less can be attached. To prevent vignetting and to obtain the optimal resolution, use a lens that will cover the image sensor size. Model Name Image Sensor GOX-5105M-5GE Mono Type 1/1.8 6.8 mm x 5.7 mm (8.82mm diagonal) GOX-5105C-5GE...
Page 28: ② Heatsink Set (When Supplying Power Via Poe)
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Cautions: The maximum performance of the camera may not be realized depending on the lens. Attaching a lens with a mount protrusion of 9 mm or longer may damage the lens or camera. ②...
Page 29: ③ Mounting (Or Use Mp-46 Tripod Adapter Plate)
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Mounting the Heatsink You can attach the heatsink to a tripod or mount the heatsink on a wall or other devices using the screw holes on the lower part of the heatsink.
Page 30: ⑤ Network Card
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE The longest cable length varies depending on the type of LAN cable and the Ethernet standard. Below, the table shows the relationship diagram between LAN cable type and Ethernet standard. Correctly select the LAN cable type according to the Ethernet standard to be used.
Page 31: Step 4: Verify The Connection Between The Camera And Pc
Verify whether the camera is properly recognized via Control Tool. 1. Launch eBUS Player for JAI. eBUS Player for JAI startup screen appears. 2. Select the camera you want to configure. Click the Select / Connect button. 3. The connected camera is listed. Please select one camera and click OK.
Page 32 User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE 4. Check that the settings of the selected camera are displayed. 5. Click the Device control button. The screen shown below will be displayed. In this window, you can adjust various settings of the camera.
Page 33: Step 5: Change The Camera Settings
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Step 5: Change the Camera Settings This section explains how to change settings by describing the procedure for changing the output format as an example. Configure the Output Format Configure the size, position, and pixel format of the images to be acquired.
Page 34: Step 6: Adjust The Image Quality
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Step 6: Adjust the Image Quality Related Setting Items: AnalogControl Display the camera image and adjust the image quality. Display the Image Display the image captured by the camera. When you click the Play button, the camera image appears in the right area.
Page 35: Adjust The Gain
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Adjust the Gain Adjust the image quality using the gain and white balance functions. The Visibility must be changed from Beginner to Guru. Note: For details on the Gain control, see Gain Control in the Main Functions chapter.
Page 36: Adjust The White Balance
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Adjust the White Balance Adjust the white balance using the automatic adjustment function. Note: The white balance is only supported on color models. Automatic White Balance Adjustment 1.
Page 37: Adjust The Black Level
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Adjust the Black Level 1. Expand AnalogControl, and select the black level you want to configure in BlackLevelSelector. All (master black), Red* (digital R), and Blue* (digital B) can be configured. Note: *Color models only.
Page 38: Step 7: Save The Settings
Related Setting Items: UserSetControl The setting values configured in eBUS SDK for JAI will be deleted when the camera is turned off. By saving current setting values to user memory, you can load and recall them whenever necessary. You can save up to three sets of user settings in the camera. (User Set1 to 3) Note: Changes to settings are not saved to the computer (eBUS SDK for JAI).
Page 39: To Save User Settings
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE To Save User Settings 1. Stop image acquisition. 2. Expand UserSetControl, and select the save destination (UserSet1 to UserSet3) in UserSetSelector. Note: The factory default setting values are stored in Default and cannot be overwritten. Caution: Settings can only be saved when image acquisition on the camera is stopped.
Page 40: To Load User Settings
User Manual (Ver. 1.0) - Preparation GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE To Load User Settings 1. Stop image acquisition. User settings can only be loaded when image capture on the camera is stopped. 2. Select the settings to load (UserSet1 to UserSet3) in UserSetSelector. 3.
Page 41: Main Functions
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Main Functions This chapter describes the camera's main functions. Acquisition Control Related Setting Items: AcquisitionControl This camera has three Acquisition modes (SingleFrame, MultFrame, Continuous). Use the AcquisitionControl settings to perform operations and settings for image capture.
Page 42: Changing The Frame Rate
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Note: After changing various settings, the black level may not be stable for several frames immediately after AcquisitionStart. Changing the Frame Rate When TriggerMode is disabled, you can change the frame rate in AcquisitionFrameRate.
Page 43: Exposure Mode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Exposure Mode Related Setting Items: AcquisitionControl This camera has three Exposure modes (Off, Timed, TriggerWidth). Use the AcquisitionControl settings to perform operations and settings for exposure. ExposureMode = Off Exposure control is not performed (free-running operation).
Page 44: Actual Exposure Time
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Actual Exposure Time Related Setting Items: AcquisitionControl When ExposureMode is set to Timed, the actual exposure time will consist of the image sensor’s offset duration (2.45us) added to the ExposureTime setting configured on the camera.
Page 45: Trigger Control
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Trigger Control Related Setting Items: AcquisitionControl The camera allows the following controls to be performed via external trigger signals. TriggerSelector Description AcquisitionStart Start image acquisition in response to the external trigger signal input.
Page 46: When Using The Framestart Trigger
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE changed due to changes of other setting items). Width (ImageFormatControl), Height (ImageFormatControl), ChunkModeActive (ChunkDataControl), GevSCPSPacketSize (TransportLayerControl) The settings for exposure control and triggers are related to each other. Be sure to configure the settings described in Exposure Mode.
Page 47 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE FrameStart and AcquisitionTransferStart Triggers On this camera, when AcquisitionTransferStart is set to On, the camera expects that the number of AcquisitionTransferStart trigger inputs is the same as the number of FrameStart trigger inputs. Otherwise, a GVSP error may occur.
Page 48: Pixel Format
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Pixel Format Related Setting Items: ImageFormatControl Pixel Format Alignments for GigE Vision Selectable PixelFormat is as follows. BayerRG8 (default), BayerRG10, BayerRG10Packed, BayerRG12, BayerRG12Packed, BayerGR8*, BayerGR10*, BayerGR10Packed*, BayerGR12*, BayerGR12Packed*, BayerGB8*, BayerGB10*, BayerGB10Packed*, BayerGB12*, BayerGB12Packed*, BayerBG8*, BayerBG10*, BayerBG10Packed*, BayerBG12*, BayerBG12Packed*, RGB8,...
Page 49: Sensordigitizationbits
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE SensorDigitizationBits Related Setting Items: ImageFormatControl You can use SensorDigitizationBits to select the sensor output bits for this camera (8bits, 10bits, and 12bits: default = 10bits). Notes: When SensorDigitizationBits is set to "8Bits", the sensitivity is 4 times higher than when set to 10Bits/12Bits.
Page 50: Gpio (Digital Input/Output Settings)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GPIO (Digital Input/Output Settings) Related Setting Items: DigitalIOControl The camera can input/output the following signals to and from external input/output connectors. External Output Line2 : Opt Out DC IN / TRIG IN Connector (6-pin round) Internal Output...
Page 51: Videoprocessbypassmode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE The table below shows the source signals that can be set. VideoProcessBypassMode Related Setting Items: ImagingControl The video process bypass mode is a function that bypasses internal video processing on the camera. To use this function, VideoProcessBypassMode must be set to On.
Page 52: Calculate The Maximum Frame Or Trigger Rate (Approximate)
GevGVSPExtendedIDMode = Off (default) The Frame Rate Calculator, which calculates the maximum frame rate or trigger rate, is available for download from the product page on the JAI website (www.jai.com). 1. Calculate the H Period The H Period value can be calculated from the LineTime[clk] value, which is calculated using the IF_ LINETIME, SENSOR_LINETIME, and VIDEO_LINETIME values.
Page 53 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE PixelSize value: Select the value from the table below based on your Pixel Format setting. PixelFormat PixelSize Mono8 BayerRG8 Mono10, Mono12 BayerRG10, BayerRG12 Mono10Packed, Mono12Packed BayerRG10Packed, BayerRG12Packed RGB8...
Page 54 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE B. SENSOR_LINETIME[clk] SENSOR_LINETIME[clk] = HMAX Select the HMAX value from the table below based on the Sensor Operation, the SensorDigitizationBits setting, and your camera model. Sensor GOX-5105 GOX-8105...
Page 55: Calculate The Minimum Frame Period
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE LineTime[clk] Next, calculate the LineTime[clk] value using the IF_LINETIME, SENSOR_LINETIME, and VIDEO_ LINETIME values. LineTime[clk] = MAX( IF_LINETIME[clk], SENSOR_LINETIME[clk], VIDEO_LINETIME[clk] ) H Period Finally, calculate the H Period based on the above LineTime[clk] value.
Page 56: Calculate The Maximum Frame Rate Or Maximum Trigger Rate
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE 3. Calculate the Maximum Frame Rate or Maximum Trigger Rate Finally, calculate the maximum acquisition frame rate (when in Continuous Mode) or maximum trigger rate (when in Trigger Mode).
Page 57 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Next, calculate the Maximum Trigger Rate. The formula depends on whether the Exposure Time value is longer or shorter than the MaxOverlapTime_TrOlrd value. A.
Page 58: Timing Chart
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Timing Chart Related Setting Items: AcquisitionControl This section shows the timing charts under the following conditions on each model when FrameStartTriger is set to On. Exposure Mode = Timed (Overlap Readout) Exposure Mode = TriggerWidth (Overlap Readout) Exposure Mode = Timed (RCT Mode)
Page 59: Exposure Mode = Timed (Overlap Readout)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Exposure Mode = Timed (Overlap Readout) This section shows the timing charts when FrameStartTrigger is set to On, and ExposureMode is set to Timed (Overlap Readout).
Page 60: Gox-5105M-5Ge, Gox-5105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-5105M-5GE, GOX-5105C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec...
Page 61: Gox-8105M-5Ge, Gox-8105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-8105M-5GE, GOX-8105C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec Exposure Start [B] (usec) Full (Max Frame Rate) Mono8...
Page 62: Gox-12405M-5Ge, Gox-12405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-12405M-5GE, GOX-12405C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec Exposure Start [B] (usec) Full (Max Frame Rate) Mono8...
Page 63: Gox-16205M-5Ge, Gox-16205C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-16205M-5GE, GOX-16205C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec Exposure Start [B] (usec) Full (Max Frame Rate) Mono8...
Page 64: Gox-20405M-5Ge, Gox-20405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-20405M-5GE, GOX-20405C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec Exposure Start [B] (usec) Full (Max Frame Rate) Mono8...
Page 65: Gox-24505M-5Ge, Gox-24505C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-24505M-5GE, GOX-24505C-5GE Exposure Mode = Timed (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Edge to Pixel Format Frame Period [A] usec Exposure Start [B] (usec) Full (Max Frame Rate) Mono8...
Page 66: Exposure Mode = Triggerwidth (Overlap Readout)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Exposure Mode = TriggerWidth (Overlap Readout) This section shows the timing charts when FrameStartTrigger is set to On, and ExposureMode is set to TriggerWidth (Overlap Readout).
Page 67: Gox-5105M-5Ge, Gox-5105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-5105M-5GE, GOX-5105C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format...
Page 68: Gox-8105M-5Ge, Gox-8105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-8105M-5GE, GOX-8105C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] to Next Trigger Start [C]...
Page 69: Gox-12405M-5Ge, Gox-12405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-12405M-5GE, GOX-12405C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] to Next Trigger Start [C]...
Page 70: Gox-16205M-5Ge, Gox-16205C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-16205M-5GE, GOX-16205C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] to Next Trigger Start [C]...
Page 71: Gox-20405M-5Ge, Gox-20405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-20405M-5GE, GOX-20405C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] to Next Trigger Start [C]...
Page 72: Gox-24505M-5Ge, Gox-24505C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-24505M-5GE, GOX-24505C-5GE Exposure Mode = TriggerWidth (Frame Start Trigger On, Overlap Readout) Period From Trigger Start Period from Exposure End Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] to Next Trigger Start [C]...
Page 73: Exposure Mode = Timed (Rct Mode)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Exposure Mode = Timed (RCT Mode) This section shows the timing charts when FrameStartTrigger is set to On, and ExposureMode is set toTimed (RCT Mode). Frame Period (usec) Period From Trigger Start Edge to Exposure Start (usec) Data Invalid Period (usec)
Page 74: Gox-5105M-5Ge, Gox-5105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-5105M-5GE, GOX-5105C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format...
Page 75: Gox-8105M-5Ge, Gox-8105C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-8105M-5GE, GOX-8105C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] (usec)
Page 76: Gox-12405M-5Ge, Gox-12405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-12405M-5GE, GOX-12405C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] (usec)
Page 77: Gox-16205M-5Ge, Gox-16205C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-16205M-5GE, GOX-16205C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] (usec)
Page 78: Gox-20405M-5Ge, Gox-20405C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-20405M-5GE, GOX-20405C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] (usec)
Page 79: Gox-24505M-5Ge, Gox-24505C-5Ge
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE GOX-24505M-5GE, GOX-24505C-5GE Exposure Mode = Timed (Frame Start Trigger On, RCT Mode) Period From Trigger Start Data Invalid Period [C] Pixel Format Frame Period [A] (usec) Edge to Exposure Start [B] (usec)
Page 80: Gain Control
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Gain Control Related Setting Items: AnalogControl Adjust the overall gain with AnalogAll (master gain), and adjust the white balance by changing DigitalRed and DigitalBlue. Color Model Monochrome Model Automatic Gain Level Control...
Page 81: White Balance
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE White Balance Related Setting Items: AnalogControl To adjust the white balance automatically, set BalanceWhiteAuto to Once (automatic adjustment only once) or Continuous (automatic adjustment always). The metering area can be limited for automatic adjustment.
Page 82: Alc (Automatic Level Control) Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ALC (Automatic Level Control) Function Related Setting Items: AutoLevelControl The ALC (automatic level control) function combines the automatic gain control (AGC/Auto Gain Control) and automatic exposure control (ASC/Auto Shutter Control) functions and is capable of handling various changes in brightness.
Page 83: Gamma Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Gamma Function Related Setting Items: AnalogControl The Gamma function corrects the output signals from the camera beforehand (reverse correction), taking into consideration the light-emitting properties of the monitor display. As the light-emitting properties of the monitor are not linear, the entire image may be darker or the gradation in the dark areas may be less noticeable when camera outputs are displayed without processing.
Page 84: Lut (Lookup Table)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE LUT (Lookup Table) Related Setting Items: LUTControl The LUT function is used to generate a non-linear mapping between signal values captured on the sensor and those that are output from the camera.
Page 85: Blemishcompensation
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE BlemishCompensation Related Setting Items: BlemishControl Multiple defective pixels that are not adjacent to each other can occur on CMOS sensor cameras. This camera features a function that interpolates defective pixels using the surrounding pixels. Up to 2000 pixels can be corrected.
Page 86: Manual Configuration
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Manual Configuration 1. Select the index in BlemishCompensationIndex. You can select from 1 to 2000. However, configure the indexes in order starting with the smallest index. If you skip indexes while configuring settings, interpolation may not be performed.
Page 87: Shading Correction
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Shading Correction Related Setting Items: ShadingControl The ShadingCorrection function corrects non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment. Using this function allows correction even if top, bottom, left, and right shading is not symmetrical in relation to the center of the screen (H, V).
Page 88: To Use The Shading Correction Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Cautions: For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is limited to 8 times the amount of gain before correction. (The amount of gain cannot be increased to more than 8 times the amount of gain from before correction.) If the area in the screen with the highest brightness level is 1000 LSB or higher (during 10-bit video output), or if the lowest brightness level is less than 45 LSB (during 10-bit video...
Page 89: Binning Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Binning Function Related Setting Items: ImageFormatControl The Binning function allows you to combine the signal values of clusters of adjacent pixels to create improved virtual pixels.
Page 90: Image Scaling Mode (Xscale)
Image Scaling Mode (Xscale) Related Setting Items: ImageFormatControl JAI's Xscale algorithm digitally reduces the sensor's pixel resolution by specifying the vertical and horizontal scaling ratio. This function can also be used for color models and allows finer adjustment of resolution than the conventional Binning Function.
Page 91: Specifying The Scaling Ratio
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE 4. Use ImageScalingHorizontal and ImageScalingVertical to specify the horizontal and vertical scaling ratio. For more information on how to specify the scaling ratio, see Specifying the Scaling Ratio.
Page 92 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Example 2 When you are replacing your camera with a new one but the new camera has a different pixel size and resolution, you can reproduce the current camera's pixel size and output image size on the replacement camera, using the ROI Function (Single ROI)
Page 93: Decimation Mode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Example 3 If you are using a GOX-20405 camera with SensorWidth/SensorHeight of 4512, and you want to scale the output image to 3000 x 3000, set ImageScalingHorizontal and ImageScalingVertical to "0.6649" (3000 ÷...
Page 94: Gradation Compression Mode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Gradation Compression Mode Related Setting Items: ImageFormatControl This function compresses the bit depth of captured images to enable images containing a wide range of pixel values to be output as a narrower set of intensity gradations.
Page 95: Examples
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE How to Configure 1. Set GradationCompressionMode to On to enable the function. 2. Select a value for GradationCompression1stKneePoint to indicate where to start applying compression on the intensity values coming from the sensor.
Page 96 Cautions: When VideoProcessBypassMode is set to Off, JAI cannot guarantee the configured knee point value because the GradationCompression1st(2nd)KneePoint value will not match the output signal's knee point level due to the effect of the digital gain value, which is performed during post-processing.
Page 97: Overlay Mode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Overlay Mode Related Setting Items: ImageFormatControl Note: This function cannot be used with the Sequencer Function. OverlayMode = MultiRoiAreaMode In this mode, you can check the readout area when using the ROI Function (Multi ROI).
Page 98: Roi Function (Single Roi)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ROI Function (Single ROI) Related Setting Items: ImageFormatControl The ROI (region of interest) function allows you to output images by specifying the areas to scan. Specify the area to scan by specifying width, height, and horizontal/vertical offset values under ImageFormatControl.
Page 99: Single Roi - Example
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Height/OffsetY (Lines) Height Binning OFF Binning ON (Mono Binning Mode *C, D = HeightMax OffsetY models only) Vertical Binning Height 8 to [(*C) - 4 to [ (*D) - OffsetY], GOX-5105MC-5GE 2064 1032...
Page 100: Roi Function (Multi Roi)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ROI Function (Multi ROI) Related Setting Items: MultiROIControl Notes: Refer to Functions That Cannot Be Used Together for usage restrictions. If this function is turned on while Shading Correction is set to On, Shading Correction will be forced to Off.
Page 101 User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Caution: The specified areas cannot overlap. If the areas overlap, all indexes after the overlapping areas become unconfigurable. Notes: The frame rate can be increased in relation to the size of the area specified in the vertical direction, but not in relation to the horizontal direction.
Page 102: Configuration Example
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Configuration Example To use four areas as shown below, refer to the following. 1. Set MultiROIControl->MultiRoiMode On. 2. Select “0” in MultiRoiIndex. Set MultiRoiWidth, MultiRoiHeight, MultiRoiOffsetX and MultiRoiOffsetY.
Page 103: Color Space Conversion (Colortransformationcontrol)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Color Space Conversion (ColorTransformationControl) Related Setting Items: ColorTransformationControl Note: This function is available only when the Pixel Format is set to RGB8, RGB10V1Packed, or RGB10p32.
Page 104: Edge Enhancer, Color Enhancer
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE 3. ColorMatrixValue can be set to a value from -2 to +2. ColorTransformationControl for detailed information on the setting items. Edge Enhancer, Color Enhancer Related Setting Items: ImagingControl This camera is equipped with an Edge Enhancer function for enhancing the contrast of lines or edges...
Page 105: Sequencer Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Sequencer Function Related Setting Items: SequencerControl The Sequencer function lets you define up to 32 index combinations of exposure time, gain, ROI, and other settings which can be stepped through each time a trigger is received.
Page 106: Sample Triggersequencer Mode Operation
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE SequencerFrameCount: This configures the number of frame acquisitions for the selected SequencerIndex. SequencerReset: During TriggerSequencer mode operation, this switches the index number to be executed to that specified in SequencerSetStart.
Page 107: Commandsequencer Mode
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE CommandSequencer Mode As with TriggerSequencer mode, you can define up to 32 indexes beforehand in this mode. Set SequencerCommandIndex to point to one of your preconfigured indexes. This index will be executed on each trigger, until it is changed to point to a different index, typically by your vision application.
Page 108: Pulse Generator
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Pulse Generator Related Setting Items: PulseGenerator Tips for using the Pulse Generator By using this function, any signal can be generated inside the camera. The following is an example of signal generation.
Page 109: Counter And Timer Control Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Counter and Timer Control Function Related Setting Items: CounterAndTimerControl Note: This camera supports only the counter function. The counter function counts up change points in the camera’s internal signals using the camera’s internal counter and reads that information from the host side.
Page 110: Internal Camera Blocks
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Note: You can reset a specific counter's count value by executing CounterReset[Counter0, Counter1, Counter2, Counter3]. Internal Camera Blocks To Use the Counter Function Configure the settings as follows.
Page 111: Action Control Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Action Control Function Related Setting Items: ActionControl How to use GigE Vision Action Commands The Action Control Function is a function that executes the pre-configured action when the camera receives action commands.
Page 112: Action Control Example
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Action Control Example Assume that the following settings have been pre-configured on the camera. ActionDeviceKey : 0x00001001 ActionGroupMask[1] : 0x00000011 ActionGroupKey[1] : 0x00000001 ActionGroupMask[2] : 0x00000111 ActionGroupKey[2] : 0x00000002 When the camera receives action commands (ActionDeviceKey:0x00001001,...
Page 113: Event Control Function
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Event Control Function Related Setting Items: EventControl The Event Control function is a function that outputs a signal change point inside the camera as information indicative of an event occurrence (event message).
Page 114: Ptp (Precision Time Protocol)
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE PTP (Precision Time Protocol) Related Setting Items: TransportLayerControl The camera can work as the slave for Precision Time Protocol defined in IEEE 1588. When the IEEE 1588 master clock exists in the network where the camera is connected, this function synchronizes the camera to the time of the master clock.
Page 115: Non-Volatile Flash Memory
The camera has non-volatile memory for users to store data. Refer to the technical note “Storing Data in On-Camera Flash Memory” for more information. Note: JAI strongly recommends saving images to the PC or other storage location because the non-volatile flash memory may not have enough memory size to store large data.
Page 116: Functions That Cannot Be Used Together
User Manual (Ver. 1.0) - Main Functions GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Functions That Cannot Be Used Together The table below shows functions that cannot be used with ImageFormatControl, MultiROIControl SequencerControl setting items. Note: For functions that are not in this table, refer to the relevant function topic or setting item topic.
Page 117: Setting List
Setting List This camera complies with GenICam. Each setting item name conforms to GenICam SFNC (Standard Features Naming Convention). (There are some JAI-specific setting items). Each setting item is an integer type (IInteger), a real type (IFloat), an element enumeration type (IEnumeration), a character string (IString), a logical type (IBoolean), and a category type (ICategory) or a command type (ICommand) for executing the function.
Page 118: Feature Properties
Display/configure information related to the device. Setting DeviceControl Item Default Value Description Range DeviceScanType 0:Areascan Display the device scan type. "JAI DeviceVendorName Display the manufacturer name. Corporation" DeviceModelName Display the model name. See the DeviceManufacturerInfo Display the manufacturer information. possibilities DeviceVersion Display the device version.
Page 119 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting DeviceControl Item Default Value Description Range DeviceManifest Display the PrimaryURL. PrimaryURL DeviceManifest Display the SecondaryURL. SecondaryURL 0:GigEVision DeviceTLType Transport Layer type of the device. (Fixed) DeviceTLVersionMajor 2 (Fixed)
Page 120 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting DeviceControl Item Default Value Description Range TimestampLatchValue 0 ~ 64bit max Maximum value Signed 64-bit max value. 0: Value1 1: Value2 UserDefinedValueSelector 2: Value3 0: Value1...
Page 121: Transportlayercontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE TransportLayerControl Display information on transport layer control. TransportLayerControl Item Setting Range Default Value Description Display the payload size. (Include ChunkData) (unit: PayloadSize bytes) GigEVision 0:Single Link...
Page 122 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE TransportLayerControl Item Setting Range Default Value Description GevCurrentIPConfiguration 0: False 1: TRUE Select whether to set the IP configuration to DHCP. DHCP 1: True 0: False GevCurrentIPConfiguration...
Page 123 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE TransportLayerControl Item Setting Range Default Value Description GevGVCPExtendedStatus 0:Version1_1 0:Version1_1 Select the GevGVCPExtendedStatusCodes. CodesSelector 1:Version2_0 GevGVCPExtended Enables the generation of extended status codes. StatusCodes GevGVCPPendingAck 0: Off...
Page 124 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE TransportLayerControl Item Setting Range Default Value Description Enables the camera to continue to stream, for this GevSCCFGUnconditional 0: False stream channel, if its control channel is closed or 0: FALSE Streaming regardless of the reception of any ICMP messages (such...
Page 125: Imageformatcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ImageFormatControl Configure image format settings. Note: Refer to Functions That Cannot Be Used Together for usage restrictions. Default Image Format Control Item Setting Range Description Value...
Page 126 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Image Format Control Item Setting Range Description Value Display the maximum image height. GOX-5105MC-5GE: 2064 (1032) GOX-8105MC-5GE: 2848 (1424) GOX-12405MC-5GE: 3008 (1504) GOX-16205MC-5GE: 3040 (1520) HeightMax GOX-20405MC-5GE: 4512 (2256)
Page 127 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Image Format Control Item Setting Range Description Value Set the vertical offset. Note: This setting is available only when OffsetY ImageScalingMode=Off. Related Topic: ROI Function Setting Range: 0 ~ [HeightMax - Height], Step 2(1)*...
Page 128 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Image Format Control Item Setting Range Description Value Specifies the vertical scaling ratio in decimal units. For ImageScalingVertical 0.0625 ~ 1 example, if you want to scale the image by 50% in the vertical direction, specify "0.5".
Page 129 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Image Format Control Item Setting Range Description Value Set the pixel format. Color Models 0x01080009: BayerRG8 (Default) 0x0110000D: BayerRG10 0x010C0027: BayerRG10Packed 0x01100011: BayerRG12 0x010C002B: BayerRG12Packed 0x01080008: BayerGR8*...
Page 130 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Image Format Control Item Setting Range Description Value Set the first knee point of the sensor's gradation compression function in percentage. GradationCompression Setting Range (%): 0, 6.25, 12.5, 25, 50, 100 1stKneePoint...
Page 131: Multiroicontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE MultiROIControl Configure settings for Multi ROI. Related Topic: ROI Function (Multi ROI) Note: Refer to Functions That Cannot Be Used Together for usage restrictions. Setting Default Multi ROI Control Item...
Page 132 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting Default Multi ROI Control Item Description Range Value Set the vertical offset for the selected Multi Roi index. Min: The minimum value of the range where each Index does not overlap. MultiRoiOffsetY Max: The maximum value of the range where each Index does not overlap.
Page 133: Acquisitioncontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE AcquisitionControl Configure image capture settings. Acquisition Control Setting Range Default Value Description Item AcquisitionMode 0:SingleFrame 1:MultiFrame 2:Continuous Select the image capture mode. Related Topic: 2:Continuous Acquisition Control...
Page 134 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Acquisition Control Setting Range Default Value Description Item 0:Off TriggerMode 0:Off Select the trigger mode. 1:On TriggerSoftware Execute a software trigger. Select the trigger signal source. 7-10: PulseGenerator0-3 11-14: UserOutput0 -3 15-18: Action0-3...
Page 135: Digitaliocontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Acquisition Control Setting Range Default Value Description Item Set whether to enable auto exposure. 0: Off ExposureAuto 1:Once 0: Off When set to Once, the automatic adjustment will be performed 2:Continuous only once, and then automatically switched to Off.
Page 136 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Digital IO Control Setting Default Description Item Range Value Select the line source signal for the item selected in LineSelector. 0: Off (Only when LineSelector is set to TimestampReset) 1: AcquisitionActive 2: FrameActive 4: ExposureActive...
Page 137 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Digital IO Control Setting Default Description Item Range Value Remove noise from the OptIn input signal of Digital I/O. Step: 100 OptInFilter (ns) 40000000 Setting Range: 0 ~ 40ms Set the UserOutput signal.
Page 138: Pulsegenerator
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE PulseGenerator Configure pulse generator settings. Related Topic: Pulse Generator Pulse Generator Item Setting Range Default Value Description Set the division value for the prescaler (12 bit) using ClockPreScaler 1 ~ 4096 PixelClock as the base clock.
Page 139 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Pulse Generator Item Setting Range Default Value Description Set the start point of the Low interval as a clock count. PulseGeneratorEndPoint 1 ~ 1048575 12500 When the counter reaches this value, the output will be Set the start point of the Low interval in milliseconds.
Page 140: Analogcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE AnalogControl Configure the analog control settings. Default Analog Control Item Setting Range Description Value GainSelector Select the gain to configure. 0: Analog All 0:Analog 1: Digital Red Related Topic:...
Page 141 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Analog Control Item Setting Range Description Value Select the area for which to configure AWBAreaEnable. Note: Color models only. 0: Low Right 1: Low Mid-Right 2: Low Mid-Left 3: Low Left...
Page 142: Lutcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Default Analog Control Item Setting Range Description Value Gamma Set the gamma value. Related Topic: 0.45 ~ 1 0.45 Gamma Setting Range: 0.45, 0.50, 0.55, 0.60, 0.65, 0.75, 0.80, 0.90, 1.00 Function 0: Off LUTMode...
Page 143: Autolevelcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE AutoLevelControl Configure AutoLevelControl. Related Topic: ALC (Automatic Level Control) Function Auto Level Control Setting Default Description Item Range Value Sets the channel to be used for ALC control reference. Note: Color models only.
Page 144 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Auto Level Control Setting Default Description Item Range Value True: Operate ALC with all areas designated as photometry areas, regardless of the individual enabled/disabled photometry area states configured in 0: False ALCAreaSelector.
Page 145: Colortransformationcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ColorTransformationControl Configure color transformation settings. Related Topic: Color Space Conversion (ColorTransformationControl) Note: This function is available only when the Pixel Format is set to RGB8, RGB10V1Packed, or RGB10p32.
Page 146: Imagingcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ImagingControl Configure other JAI functions. Setting Default Imaging Control Item Description Range Value VideoProcessBypassMode 0: Off 0: Off Enable/disable VideoProcessBypass mode. Related Topic:...
Page 147: Shadingcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ShadingControl Configure shading correction settings. Related Topic: Shading Correction Setting Default Shading Control Item Description Range Value Select the shading correction method. 0: Flat ShadingCorrectionMode 0: Flat Shading...
Page 148: Blemishcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE BlemishControl Configure settings for JAI white blemish correction. Related Topic: BlemishCompensation Setting Default Blemish Control Item Description Range Value Enable/disable blemish correction.
Page 149: Sequencercontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting Default Blemish Control Item Description Range Value Display the X coordinate (horizontal pixel position) of the target blemish selected in BlemishCompensationIndex. You can also manually enter the BlemishCompensation X coordinate of the blemish you want to correct.
Page 150 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting Default Sequencer Control Item Description Range Value Set the height of the selected SequencerIndex. HeightMax Setting Range: 8 (4)* ~ [HeightMax - OffsetY], Step 2(1)* SequencerHeight value *For monochrome models, when BinningVertical = 2 or...
Page 151 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting Default Sequencer Control Item Description Range Value SequencerSetActive 1 ~ 32 Displays the active index number. Specify the first index number to switch to when starting SequencerSetStart 1 ~ 32 TriggerSequencerMode.
Page 152: Counterandtimercontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE CounterAndTimerControl Configure counter settings. Note: This camera only supports the counter functions. Related Topic: Counter and Timer Control Function Setting Default Counter and Timer Control Item Description Range Value...
Page 153: Actioncontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ActionControl Configures action control settings. Related Topic: Action Control Function Action Control Item Setting Range Default Value Description 0x00000000 ~ An action command is executed if this ActionDeviceKey matches the ActionDeviceKey 0x00000000 0xFFFFFFFF...
Page 154: Eventcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE EventControl Configure settings for event control. Related Topic: Event Control Function Note: On this camera, Frame ID is fixed to "0" because it is not fixed when the event occurs. Setting Default Event Control Item...
Page 155 User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Setting Default Event Control Item Description Range Value EventExposureStart 0x9003 Displays the EventID (0x9003). 0 ~ 64bit EventExposureStartTimestamp Displays the Timestamp value when an event occurs. EventExposureStartFrameID 0 (Fixed) Displays the FrameID value when an event occurs.
Page 156: Chunkdatacontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE ChunkDataControl Configure Chunk Control settings. Related Topic: Chunk Data Function Default Chunk Data Control Item Setting Range Description Value 0: Off ChunkModeActive 0: Off Set whether to enable ChunkData.
Page 157: Testcontrol
User Manual (Ver. 1.0) - Setting List GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE TestControl Configure the test control setting. Test Control Setting Default Description Item Range Value PendingAck function test command. The camera waits for TestPendingAck (ms) time and TestPendingAck 0 ~ 10000 returns an Ack response.
Page 158: Miscellaneous
GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Miscellaneous Troubleshooting Check the following before requesting help. If the problem persists, contact your local JAI distributor. Power Supply and Connections Issue: The POWER/TRIG LED remains lit amber and does not turn green, even after power is supplied to the camera.
Page 159: Specifications
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Specifications Item Monochrome Color Scanning System Progressive scan, 1 tap Synchronization Internal Interface 5GBASE-T Ethernet (GigE Vision 2.0), IEEE 802.3af Image Sensor Monochrome CMOS Bayer Color CMOS >60 dB@10bit Conditions:...
Page 160 User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Item Monochrome Color PacketSize 1476 PacketSize 12036 GOX-5105MC-5GE 98 fps 103 fps GOX-8105MC-5GE 62 fps 66 fps GOX-12405MC-5GE 41 fps 43 fps Acquisition Frame Rate GOX-16205MC-5GE 32 fps 33 fps...
Page 161 User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Item Monochrome Color PacketSize 1476 PacketSize 12036 GOX-5105C-5GE 32 fps 34 fps GOX-8105C-5GE 20 fps 22 fps GOX-12405C-5GE 13 fps 14 fps GOX-16205C-5GE 10 fps 11 fps Acquisition Frame Rate...
Page 162 Format - ROI (Offset Y) GOX-24505MC-5GE: 0 to [4608 (2304) - Height], step2(1) Note: For monochrome models, when BinningHorizontal = 2 or FD2x2BinningMode = On, the value in parenthesis is applicable. GOX-5105M-5GE: 2472 Digital Image Output GOX-8105M-5GE: 2856 Format: Binning (H) = 1...
Page 163 User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Item Monochrome Color GOX-5105M-5GE: 2064 Digital Image Output GOX-8105M-5GE: 2848 Format: GOX-12405M-5GE: 3008 Binning (V) = 1 and GOX-16205M-5GE: 3040 FD2x2BinningMode = GOX-20405M-5GE: 4512...
Page 164 User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Item Monochrome Color Default Level: 8LSB@8bit All (Mono/Color): -133 ~ +255 LSB Black Level Adjustment Red (Color): -64 ~ +64 LSB Blue (Color): -64 ~ +64 LSB Resolution Adjustment: 1LSB@12bit Manual Adjustment Range: AnalogAll (Mono/Color): 0db ~ 42dB...
Page 165 User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Item Monochrome Color Storage - 25°C ~ + 60°C / 20% ~ 80% (non-condensing) Temperature/Humidity CE [EN 55032:2015(CISPR32:2015) Class A, EN 55035:2017 (CISPR35:2016)], FCC Part 15 Class A, EU RoHS/WEEE, Regulations (Tentative) China RoHS, KC Housing...
Page 166: Spectral Response (Gox-5105M-5Ge/Gox-5105C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-5105M-5GE/GOX-5105C-5GE) - 166 -...
Page 167: Spectral Response (Gox-8105M-5Ge/Gox-8105C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-8105M-5GE/GOX-8105C-5GE) - 167 -...
Page 168: Spectral Response (Gox-12405M-5Ge/Gox-12405C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-12405M-5GE/GOX-12405C-5GE) - 168 -...
Page 169: Spectral Response (Gox-16205M-5Ge/Gox-16205C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-16205M-5GE/GOX-16205C-5GE) - 169 -...
Page 170: Spectral Response (Gox-20405M-5Ge/Gox-20405C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-20405M-5GE/GOX-20405C-5GE) - 170 -...
Page 171: Spectral Response (Gox-24505M-5Ge/Gox-24505C-5Ge)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Spectral Response (GOX-24505M-5GE/GOX-24505C-5GE) - 171 -...
Page 172: Dimensions
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Dimensions This section shows the dimensions for this camera and the heatsink set (HS-02). Camera Notes: Dimensional tolerance: ± 0.3mm Unit: mm - 172 -...
Page 173: Heatsink Set (Hs-02)
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Heatsink Set (HS-02) Notes: Dimensional tolerance: ± 0.3mm Unit: mm - 173 -...
Page 174: Heatsink Set (Hs-02) With The Camera
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Heatsink Set (HS-02) with the Camera Notes: Dimensional tolerance: ± 0.3mm Unit: mm - 174 -...
Page 175: Comparison Of The Decibel Display And Multiplier Display
User Manual (Ver. 1.0) - Miscellaneous GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Comparison of the Decibel Display and Multiplier Display Decibels [dB] Multipliers [X] Remarks 0.501 0.562 0.631 0.708 0.794 0.891 1.122 1.259 1.413 1.585 1.778 1.995 2.239...
Page 176: User's Record
70.795 79.433 89.125 112.202 125.893 User's Record Camera type: Go-X Series Global Shutter with 5GigE interface Model name: …………… Revision: …………… Serial No: …………… Firmware version: …………… For camera revision history, please contact your local JAI distributor. - 176 -...
Page 177: Appendix
User Manual (Ver. 1.0) - Appendix GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Appendix Related Topic: Notes on Supplying Power via PoE This section provides information on the camera's temperature (°C) when the camera is operating with a PoE power supply with the heatsink set (HS-02) attached.
Page 178: Revision History
User Manual (Ver. 1.0) - Revision History GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE Revision History Revision Date Device Version Changes 2023/03/07 DV0101 First Version Trademarks Systems and product names described in this document are trademarks or registered trademarks of their respective owners. The ™ and ® symbols are not used in this document.

This manual is also suitable for:

Gox-5105c-5ge Gox-8105m-5ge Gox-8105c-5ge Gox-12405m-5ge Gox-12405c-5ge Gox-16205m-5ge ... Show all

JAI GOX-5105M-5GE User Manual

Quick Links

Related Manuals for JAI GOX-5105M-5GE

Summary of Contents for JAI GOX-5105M-5GE

This manual is also suitable for:

Table of Contents