② Heatsink Set (When Supplying Power Via Poe); How To Attach/Mount - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Cautions:
The maximum performance of the camera may not be realized depending on the lens.
l
Attaching a lens with a mount protrusion of 9 mm or longer may damage the lens or camera.
l
② Heatsink Set (When Supplying Power via PoE)
When operating this camera with a PoE power supply without limiting the LAN cable length and frame
rate, attach the heatsink set (HS-02, sold separately) to the camera.
Note: If you operate this camera without attaching the heatsink set, follow the Operating Condition
2 on the Notes on Supplying Power via PoE

How to Attach/Mount

Attach to the Camera
The heatsink set consists of two parts: upper part and lower part. Use the
supplied screws to attach the heatsink set to the camera.
Lower part (x 3): Attach to the camera (screw holes: Green).
l
Upper part (x 4): Attach the upper part to the lower part of the heatsink
l
(screw holes: Blue).
Caution: Attach both the lower and upper heatsink parts to ensure
adequate heat dissipation.
topic.
- 28 -
User Manual (Ver. 1.0) - Preparation