Acquisitioncontrol - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE

AcquisitionControl

Configure image capture settings.
Acquisition Control
Item
AcquisitionMode
Related Topic:
Acquisition Control
AcquisitionStart
AcquisitionStop
AcquisitionFrameCount
AcquisitionFrameRate
Related Topic:
Changing the
Frame Rate
TriggerSelector
Related Topic:
Trigger Control
Setting Range Default Value
0:SingleFrame
1:MultiFrame 2:Continuous
2:Continuous
-
-
1 ~ 65535 1
0.125 ~
0:AcquisitionStart
1:AcquisitionEnd
0:AcquisitionStart
2:FrameStart
3:Acquisition
TransferStart
Select the image capture mode.
- Start image capture.
- Stop image capture.
In MultiFrame mode, set the number of frames to capture.
Display the frame rate as a frequency (unit: Hz). The maximum
value varies depending on the Width, Height, PixelFormat,
SensorDigitizationBits, Binning(Horizontal/Vertical),
FD2x2BinningMode,ImageScalingMode, Decimation
(Horizontal/Vertical), ChunkModeActive, GevSCPSPacketSize,
GevSCPD, NetworkThroughputSafetyMargin settings.
Default
GOX-5105MC-5GE: 98 fps
GOX-8105MC-5GE: 62 fps
GOX-12405MC-5GE: 41 fps
GOX-16205MC-5GE: 32 fps
-
GOX-20405MC-5GE: 25 fps
GOX-24505MC-5GE: 21 fps
Notes:
Default: the fastest FPS value when set to:
l
SensorDigitizationBits = 10bit, PixelFormat = 8bit.,
NetworkThroughputSafetyMargin = 92, PacketSize = 1476
Byte, ExtendedIDMode = Off.
See Features
l
12036.
See Notes on Supplying Power via PoE
l
restriction when using the PoE power supply.
Select the trigger operation.
- 133 -
User Manual (Ver. 1.0) - Setting List
Description
for the frame rates when PacketSize is set to
for the frame rate