JAI GOX-5105M-5GE User Manual page 150

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Sequencer Control Item
SequencerHeight
SequencerOffsetX
SequencerOffsetY
SequencerFrameCount
SequencerExposureTime
SequencerGainAnalogAll
SequencerGainDigitalRed
SequencerGainDigitalBlue
SequencerLUTEnable
SequencerSetNext
SequencerRepetition
Setting Default
Range Value
Set the height of the selected SequencerIndex.
HeightMax Setting Range: 8 (4)* ~ [HeightMax - OffsetY], Step 2(1)*
-
value
*For monochrome models, when BinningVertical = 2 or
FD2x2BinningMode = On, the value in parentheses is applicable.
Set the horizontal offset value for the selected SequencerIndex.
Setting Range: 0 ~ [WidthtMax - Width], Step 8(4)*
- 0
*For monochrome models, when BinningHorizontal = 2 or
FD2x2BinningMode = On, the value in parentheses is applicable.
Set the vertical offset value for the selected SequencerIndex.
Setting Range: 0 ~ [HeightMax - Height], Step 2(1)*
- 0
*For monochrome models, when BinningVertical = 2 or
FD2x2BinningMode = On, the value in parentheses is applicable.
Set the FrameCount value for the selected SequencerIndex.
1 ~ 65535 1
Set the exposure time for the selected SequencerIndex.
1 ~
-
8000000
Default: ExposureTimeMax (AcquisitionControl)
Set the Gain[AnalogAll] value for the selected SequencerIndex.
1.0 ~
1
126.0
Set the Gain[DigitalRed] value for the selected SequencerIndex.
0.447 ~
1
5.624
Set the Gain[DigitalBlue] value for the selected SequencerIndex.
0.447 ~
1
5.624
0: False
0: False Set the LutEnable value for the selected SequencerIndex.
1: True
Set the next index to be displayed for the selected SequencerIndex.
(Enabled only for TriggerSequencer.) If 0 is specified, the operation of
the Sequencer is stopped.
0 ~ 32 -
SequencerSetSelector = 1 ~ 31: (SequencerSetSelector+1)
SequencerSetSelector = 32: 1
1 ~ 255 1 Set the repeat count for the sequencer.
Note: The same value with AcquisitionFrameCount (AcquisitionControl)
Note: The same value with Gain[AnalogAll] (AnalogControl)
Note: The same value with Gain[DigitalRed] (AnalogControl). Color models
only.
Note: The same value with Gain[DigitalBlue] (AnalogControl). Color models
only.
- 150 -
User Manual (Ver. 1.0) - Setting List
Description