③ Mounting (Or Use Mp-46 Tripod Adapter Plate); ④ Lan Cable - JAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
Mounting the Heatsink
You can attach the heatsink to a tripod or mount the heatsink on a wall or other devices using the
screw holes on the lower part of the heatsink.
③ Mounting (or Use MP-46 Tripod Adapter Plate)
When mounting the camera directly to a wall or other device, use screws that match the mounting
holes on the camera (M3: depth 4mm for the lower part, depth 3 mm for the upper part).
Use the supplied screws to attach the tripod adapter plate (lower mounting holes).
Caution: For heavy lenses, be sure to support the lens itself. Do not use configurations in which
its weight is supported by the camera.
④ LAN Cable
Connect a LAN cable to the RJ-45 connector.
Caution: See the
The camera supports the following Ethernet standards: 1000BASE-T, 2.5GBASE-T, 5GBASE-T.
Use a LAN cable that is Category 5e or higher (Category 6 recommended).
l
Use a LAN cable that is an STP cable.
l
When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-
l
compatible network card.
Refer to the specifications of the cable for details on its bend radius.
l
Notes on LAN Cable Connection
When attaching to a tripod, use the tripod screw
l
hole (U1/4-20: Red).
When mounting to other mechanical components,
l
use M3 screw holes.
M3: Depth 6mm
M3: Depth 5mm
topic.
- 29 -
User Manual (Ver. 1.0) - Preparation
Screw holes: Yellow (x3)
Screw holes: Green (x4)