Main Menu - NovaStar CX40 Pro User Manual

Item Content
Dynamic Range
Sync
Menu

4.2 Main Menu

On the home screen, touch the icon at the bottom right or press the knob to enter the main menu page.
Figure 4-2 Main menu – Send-Only Controller and All-In-One Controller working modes
Table 4-2 Main menu description
Module Description
Set the brightness, gamma value, and color temperature parameter values to adjust the screen image
quality
Select and apply a saved preset to quickly complete settings of the parameters on the Input, Layout,
Processing and Screen Settings pages.
Set input parameters, including source selection, EDID management, HDR parameter settings, and
input color adjustment parameters.
Turn on or off the layer and set the layer parameters. Image scaling is in this menu (supported by the
All-In-One Controller working mode).
Enable or disable and set parameters of Color Replacement, 14Ch Color Correction, Curves, 3D LUT,
and Dynamics Booster.
www.novastar.tech
Description
The dynamic range of the currently processed signal

SDR: Standard Dynamic Range

HDR10: High Dynamic Range

HLG: High Dynamic Range
For the display control settings, please refer to
(HDMI only).
The sync signal currently used and the signal status

HDMI@60Hz: Sync with the frame rate of the active source.

Genlock: Sync with the frame rate of the Genlock signal.

Internal: Sync with the frame rate of the internal clock of the device.
Please refer to 6.4.3 Set Sync Source
The device main menu
You can touch this area to enter the main menu page. Please refer to
Menu for details.
CX40 Pro LED Display Controller User Manual
6.1.3 Set HDR Parameters
for related operations.
4.2 Main
8