NovaStar CX40 Pro User Manual page 10

Item Content
192.168.102.189
Input HDMI1, HDMI2,
DP, SDI, Internal
Genlock 60Hz
Port 1–6
OPT 1
Screen 1920*1080@60Hz
Bottom line
www.novastar.tech
Description
The chassis fan speed

Green: The fan speed is normal.

Yellow: Fan speed alarm. The speed exceeded the threshold range.

Yellow: Fan speed alarm. The speed exceeded the threshold range
significantly.
The connection status of the Ethernet ports

White: Connected

Gray: Not connected
The device IP address
Please refer to 7.3 Set an IP Address
The device input source type and status, and the resolution and frame rate of
the currently available input source

Green: The signal is normal.

Blue: The signal is normal, but not used.

Red: The signal is abnormal.

Gray: The signal is abnormal and not used.
You can touch this area to enter the input settings page. Please refer to
Set Input Source for related operations.
The frame rate of the currently connected sync source
When sync source not connected: "No Signal" is displayed.


When sync source connected: Display the frame rate of the current sync
source.
The statuses of the Ethernet output ports

Blue: The Ethernet port connection works and the port serves as primary.

Gray: The Ethernet port is not connected or the connection does not work.

Blue with a mark (not flashing) on top corner of icon: The Ethernet port is in
backup status, but the backup has not taken effect.

Blue with a mark (flashing) on top corner of icon: The Ethernet port is in
backup status and the backup has taken effect.
You can touch this area to enter the screen settings page. Please refer to
Screen Settings for related operations.
The statuses of the OPT port

Blue: Connected

Gray: Disconnected
The screen resolution and frame rate
The screen brightness
You can touch this area to open a pop-up window and drag the slider to adjust
the screen brightness.
Black out
You can touch this area to change the current display status on the LED
screen. When it is enabled, the LED screen goes black. The input source is
still being played in the background.
Freeze
You can touch this area to change the current display status on the LED
screen. When it is enabled, the LED screen always displays the frame when
frozen. The input source is still being played in the background.
CX40 Pro LED Display Controller User Manual
for related operations.
5.1
6.4
7