NovaStar CX40 Pro User Manual page 7

12G-SDI IN
Outputs
Type
Ethernet ports
1–6
Optical port
HDMI 2.0 LOOP
12G-SDI LOOP
SPDIF OUT
Controls
Type
ETHERNET
GENLOCK
AUX
Power
100-240V~,
50/60Hz, 1.5A
Note
The width of HDMI and DP input sources must be an integer multiple of eight. In addition, the maximum input
resolution and maximum width and height must be obtained by setting the graphics card.
www.novastar.tech
2 Standards
Resolutions
Frame rates
Others
Qty Description
6 5Gbps Ethernet ports

Max device load capacity: 9 million pixels

The maximum load capacity per port is as follows. For details, see chapter
Ethernet Port Load
−
8bit@60Hz: 2,592,000 pixels
−
10bit@60Hz: 2,073,000 pixels
−
12bit@60Hz: 1,728,000 pixels
1 40Gbps optical port
2 HDMI loop through. Up to 8 devices can be cabled in one loop.
2 SDI loop through. Up to 8 devices can be cabled in one loop.
1 A digital audio output (Reserved)
Qty Description
2 Gigabit Ethernet control ports. Support TCP/IP protocol and star topology.
They have the same functions without priority and order, and can be connected to
VMP software. No switch or router is needed to deploy multiple devices on the same
LAN via device cascading as the network switching function is already built in. Up to 20
CX40 Pro devices can be cascaded.
1 A pair of Genlock signal connectors. Support Bi-Level and Tri-Level.

IN: Accept the sync signal.

LOOP: Loop the sync signal.
For standard Genlock signal generators, up to 20 CX40 Pro devices can be cascaded.
1 An auxiliary port that connects to the central control device (RS232) (Reserved)
1 An AC power input connector and switch
CX40 Pro LED Display Controller User Manual
Support ST-2082 (12G), ST-2081 (6G), ST-424 (3G) and
ST-292 (HD) standard video inputs.
Support 3G-Level A/Level B (DS mode).
Max resolution: 4096×2160@60Hz
Support frame rates up to 60 Hz.
Belden 12G SDI standard cables are recommended.
Cables up to 50 meters are supported.
Capacity.
11
4