Table of Contents
Advertisement
8
System Settings
8.1 Switch Working Mode
Switch the device working mode to All-In-One Controller or Send-Only Controller.
On the main menu screen, choose Settings > Working Mode.
Figure 8-1 Working Mode
Select All-In-One Controller or Send-Only Controller.
In All-In-One Controller mode, the layer and scaling functions will be available.
In Send-Only Controller mode, the layer and scaling functions will be unavailable, and system latency will be
reduced by one frame.
Click OK.
8.2 Set the Auto Lock LCD Time
Set the operation timeout period for other user interface. The LCD will return to the home screen automatically after
the specified amount of time if no action is performed during the time specified.
On the main menu screen, choose Settings > Auto Lock LCD.
Figure 8-2 Auto Lock LCD
Select 30s, 1min, 5min or Never from the drop-down options as needed.
8.3 Enable Screen Saver
Set the time when the screen saver will be enabled.
On the main menu screen, choose Settings > Enable Screen Saver.
www.novastar.tech
CX40 Pro LED Display Controller User Manual
32
Advertisement
Table of Contents
