Advertisement
4.3.7
Security configuration submenu
Menu Item
Options
TXE
Disabled / Enabled
TXE HMRFP0
Disabled / Enabled
TXE Firmware update
Disabled / Enabled
Disabled / Enabled
TXE EOP Message
TXE Unconfiguration Perform
Yes / No
4.3.8
Video configuration submenu
Menu Item
Options
VBIOS Selection
Default / Intel ISG Optimized
CRT
Disabled / Enabled
DDI1
Disabled / Enabled
Primary Display
CRT / DDI1 / None
Secondary Display
CRT / DDI1 / None
Single / Extended / Extended
Display Mode
Vertical / Clone
Custom / 640x480 / 800x480 /
800x600 / 1024x600 /
1024x768 / 1280x720 /
LFP
1280x800 / 1280x1024 /
1366x768 / 1400x900 /
1600x900 / 1680x1050 /
1920x1080
LFP Custom parameters
See submenu
VESA 24bpp / JEIDA 24bpp /
LFP Color Mode
18 bpp
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Description
®
Enable or Disable the Intel
Trusted Execution Engine (TXE, available only on Celeron CPUs)
Enable this option to remove temporarily the flash protection, in order to program the Intel
Enable this option to require a re-flashing of TXE Firmware Image
Send EOP (End of POST) Message before entering OS
Only selectable on CPUs with the TXE feature.
Allows to revert TXE settings to the factory defaults
Description
Allows loading an optimized VBIOS to solve an issue of Linux Kernels (video configuration wrong detection).
Enables or disables the CRT Video Output
Enables or disables the DDI1 Video Output, which manages the eDP to LVDS bridge. Disabling this video
output will result in disabling the LVDS output
Select the Primary Display for the use in WEC7 operating System
Select the Secondary Display for the use in WEC7 operating System
Select the Display Mode for the use in WEC7 operating System
Select a software resolution (EDID settings) to be used for the internal flat panel.
Only available when "LFP" is set to Custom. Select Detailed Timing Descriptor Parameters
Select the color depth of LVDS interface. For 24-bit color depth, it is possible to choose also the color
mapping on LVDS channels, i.e. if it must be VESA-compatible or JEIDA compatible.
®
TXE region
52
Advertisement
