Advertisement
Parallel Port Mode
LPT Port
LPT Mode
LPT IRQ
Hardware Monitor
Watchdog
4.3.14
Virtual SuperI/O configuration submenu
Menu Item
Options
Disabled / 0x3F8 / 0x2F8 /
0x3E8 / 0x2E8 / 0x3E0 /
Address
0x2E0 / 0x338 / 0x238 /
0x220 / 0x228
Disabled / 3 / 4 / 5 / 6 / 7 / 10
IRQ
/ 11 / 14 / 15
4.3.15
INT/IRQ configuration submenu
Menu Item
INT A Irq / INT B Irq / INT C Irq / INT D Irq
/ INT E Irq / INT F Irq / INT G Irq / INT H
Irq
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
External FDC
Allows to select how the parallel port signals are used, i.e. for the connection of an external Floppy Disk
Parallel Port
Drive or as a Parallel Port
Only available when "Parallel Port Mode" is set to "Parallel Port".
Enabled / Disabled
Allows enabling or disabling the Parallel Port.
SPP
EPP 1.9 and SPP
ECP
Only available when "Parallel Port Mode" is set to "Parallel Port" and "LPT Port" is Enabled.
ECP/EPP 1.9
Allows selecting the LPT Working mode
Printer Mode
EPP 1.7 and SPP
ECP/EPP 1.7
Only available when "Parallel Port Mode" is set to "Parallel Port" and "LPT Port" is Enabled.
Disabled / 5 / 7
Allows selecting the IRQ associated to the LPT Port
Enabled / Disabled
Enable or Disable the Hardware Monitor
Disabled / 1 Minute
Disable the Watchdog functionality or sets the watchdog expiry time
2 Minutes / 3 Minutes
Description
Select the Base address for each virtual Serial Port, or disable it
Select the IRQ line to assign to each Serial Port, if enabled.
Options
Description
3 / 4 / 5 / 6 / 7 /10 / 11
Selects individually the IRQ to assign to PCI INT line A / B / C / D / E / F / G / H
/ 14 / 15
59
Advertisement
