Single board computer with intel atom x series, intel celeron j / n series, intel pentium n series (formerly apollo lake) processors on picoitx form factor
Page 1
ADLER (formerly codename SBC-C41-pITX) Single Board Computer ® ® ® with Intel Celeron J / N ® ® Series, Intel Pentium N Series (formerly Apollo Lake) Processors on picoITX form factor...
Page 2
SECO S.p.A. reserves the right to change precise specifications without prior notice to supply the best product possible. For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.seco.com (registration required).
SSD M.2 Socket 2 Key B lot, size 2242 / 3042 (excludes WWAN modules) microSD Card slot (combo with miniSIM slot) ** Measured at any point of SECO standard heatspreader for this product, Networking during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment.
2.3 Electrical specifications ADLER needs to be supplied only with an external 12V ± 5% power supply. It is possible to supply the module by using two different power connectors (factory alternatives) The first possible power connector is type Molex Mini-Fit connector, type MOLEX p/n 39-28-1023 or Mini-Fit Power Connector equivalent.
SECO can provide ADLER specific passive heatspreaders and active heatsinks with fan, but please remember that their use must be evaluated accurately inside the final system, and that they should be used only as a part of a more comprehensive ad-hoc cooling solutions.