Advertisement
4.3.12
ACPI Table/features submenu
Menu Item
Options
FACP - RTC S4 wakeup
Enabled / Disabled
DSDT - ACPI S3
Enabled / Disabled
DSDT - ACPI S4
Enabled / Disabled
BGRT - ACPI BGRT
Enabled / Disabled
4.3.13
Super I/O configuration submenu
Menu Item
Winbond/Nuvoton W83627xxx (0x2E)
Keyboard Controller
Serial Port 1
Address
IRQ
Serial Port 2
Address
IRQ
Floppy Disk Controller
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Description
Enable or disable FACP ( Fixed ACPI Description Table) support for S4 wakeup from RTC
Enable or disable DSDT (Differentiated System Description Table) support for ACPI S3 State
Enable or disable DSDT (Differentiated System Description Table) support for ACPI S4 State
Enable or disable the support for ACPI Boot Graphics Resource Table
Options
Description
By selecting this voice, it will be possible to check and set all the following items.
Please notice that is the carrier board has an additional SuperI/O, it will appear here, and it will offer a
similar list of items to be configured
Enable or Disable the Keyboard Controller
Enabled / Disabled
It is strongly recommended to disable the Keyboard Controller in case that the PS/2 Keyboard interface is
not used. This will result in a much faster boot of the O.S.
Enabled / Disabled
Enable or Disable the Serial Port 1
0x3F8 / 02xF8 / 0x3E8 /
0x2E8 / 0x3E0 / 0x2E0 /
Sets the I/O Base Address for Serial Port #1
0x338 / 0x238 / 0x220 /
0x228
3 / 4 / 5 / 6 / 7 /10 / 11
Sets the IRQ associated to Serial Port #1
/ 14 / 15
Enabled / Disabled
Enable or Disable the Serial Port 2
0x3F8 / 02xF8/ 0x3E8 /
0x2E8 / 0x3E0 / 0x2E0 /
Sets the I/O Base Address for Serial Port #2
0x338 / 0x238 / 0x220 /
0x228
3 / 4 / 5 / 6 / 7 /10 / 11
Sets the IRQ associated to Serial Port #2
/ 14 / 15
Enabled / Disabled
Enable or Disable the Floppy Disk Controller
58
Advertisement
