Related Manuals for Seco SANTINO LT core
Summary of Contents for Seco SANTINO LT core
- Page 1 SANTINO LT core Cortex -A9 Single Board Computer ® ® Small sized form factor with high performance for displays up to 5.0". Product Manual...
- Page 2 PRODUCT MANUAL SANTINO LT core Document Revision History The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
-
Page 3: Table Of Contents
Annex C: Guidelines and Standards ..............28 RoHS Declaration ...................28 Supplier Declaration – Directive EG 1907/2006 REACH ......28 C-3 UL Certification ....................28 SECO Northern Europe Conformity Statement .........29 Annex D: Common Documentation ..............30 Warranty Hints ....................30 Field of Application..................31 Annex E: Technical Support ................ -
Page 4: Introduction
SANTINO LT core Introduction Thank you very much for purchasing a SECO Northern Europe product. Our products are dedicated to professional use and therefore we suppose extended technical knowledge and practice in working with such products. The information in this manual is subject to technical changes, particularly as a result of continuous product upgrades. -
Page 5: Safety Hints
Please read this section carefully and observe the instructions for your own safety and correct use of the device. Observe the warnings and instructions on the device and in the manual. SECO Northern Europe embedded systems have been built and tested by us and left the company in a perfectly safe condition.In order to maintain this condition and ensure safe operation, the user must observe the instructions and warnings contained in this manual. -
Page 6: Product Introduction
PRODUCT MANUAL SANTINO LT core Product Introduction This document is applicable for hardware revisions 1.0 or later of the SANTINO LT series. „Annex A: Hardware Revision Information“: Please find the hardware version grid in SANTINO LT is an Embedded System to be used as human machine interface (HMI) in various applications. Please refer to Annex „D-2 Field of Application“... -
Page 7: Related Documents And Online Support
PRODUCT MANUAL SANTINO LT core Related Documents and Online Support This document contains operating system specific information. The following additional documentations are available: OPERATING SYSTEMS Contains information about Linux BSP with development environment Linux Yocto Jethro Linux Embedded System Yocto (Codename: Jethro, Version 3.0) includes first information about the bootloader Flash-N-Go https://bit.ly/3rwTOUt... -
Page 8: Technical Data
PRODUCT MANUAL SANTINO LT core Technical Data i.MX6DualLite CPU Type i.MX6Solo Core Class Cortex ® ® Core Clock 1 GHz NEON for SIMD media acceleration and VFP operations; Multi-format HD 1080p Features video decoder and HD 720p video encoder hardware engine; L1 cache, 32 KB for instruction, 32 KB for data;... -
Page 9: Block Diagram Sbc
PRODUCT MANUAL SANTINO LT core Block Diagram SBC Block Diagram SANTINO LT i.MX6 24 V Step Down 2-pole Phoenix Converter 1x RGB Power PMIC Backlight 5V Supply 40-pole FFC PWM1 Battery CR1220 Backlight Backlight Battery Driver 2 pole JST RC 1 Res.Touch... -
Page 10: Technical Drawing
PRODUCT MANUAL SANTINO LT core Technical Drawing 113,8 110,8 Missing dimensions according to 3D CAD files... -
Page 11: Connectors
PRODUCT MANUAL SANTINO LT core Connectors As this manual describes a core version, the internal and external interfaces will be mentioned in the following chapter. X104 (Exemplary Illustration front side. The illustration shows the fully equipped SANTINO LT Dualcore light. It shows no heatsink to provide a better overview.) - Page 12 PRODUCT MANUAL SANTINO LT core (Exemplary Illustration back side) Pos. Description Reset Switch (SW1) Bootselect Switch (SW2) For the function of this switch please refer in the future to the Flash N Go User Manual.
-
Page 13: Installation And Start Up
PRODUCT MANUAL SANTINO LT core Installation and Start Up The content of this document is limited to explain the device connectors and how to access SANTINO LT via FTP over your local area network (LAN) within a few seconds. For advanced hardware specifications and software support, please refer to chapter „3.2 Related Documents and Online Support“... -
Page 14: Internal And External Interfaces
PRODUCT MANUAL SANTINO LT core Internal and External Interfaces Speaker (X9) Name Description Level Speaker + Parallel to X10 1.5W RMS 8 Ohm Speaker - Header: JST S2B-PH-SM3-TB Plug: ST PHR-2 with crimp contacts SPH-002GW-P0.5L-ND Ethernet (X104) Name Description Information... -
Page 15: Power (X1)
PRODUCT MANUAL SANTINO LT core Power (X1) Name Description Level Vin+ Input voltage Nom. 9 to 32 V DC Vin- Input voltage Header: Phoenix Contact MC1,5/2-G-3,81 2p Plug: MCC 1/ 2-STZ-3,81 2p, crimp contact MCC-MT 0,5-1,0 Shielding with 6,3 mm male spade terminal connector... -
Page 16: Can/Rs-485 Interface (X39)
PRODUCT MANUAL SANTINO LT core CAN/RS-485 Interface (X39) Name Description Level Ground RS-232_TXD1 Port #1: Transmit data (Output) V. 28 RS-232_RXD1 Port #1: Receive data (Input) V. 28 +24 V RS-232_RTS1 Port #1: Request-to-send (Output) V. 28 +24 V RS-232_CTS1 Port #1: Clear-to-send (Input) V. -
Page 17: Usb Host (X34)
PRODUCT MANUAL SANTINO LT core USB Host (X34) Name Description Level USB_H1_VBUS Power supply +5 V DC max 500mA USB_H1_DN Data minus (D-) USB_H1_DP Data plus (D+) Ground Header: USB Type A USB OTG (X20) Name Description Level USB_OTG_VBUS Power supply... -
Page 18: Battery Connector (X113)
PRODUCT MANUAL SANTINO LT core Battery Connector (X113) Name Description Level CR1220 Supply Ground Header: Keystone 1056 Battery: CR1220... -
Page 19: Capacitive Touch Connector (X115)
PRODUCT MANUAL SANTINO LT core 6.10 Capacitive Touch Connector (X115) Name Description Level Supply 3.3 V I2C3_SCL I²C Clock 1k Ohm Pullup I2C3_SDA I²C data 1k Ohm Pullup CTOUCH_INT# Interrupt 1k Ohm Pullup CTOUCH_RESET Reset 1k Ohm Pulldown Ground Header: FFC Connector 6x0.5mm... -
Page 20: Display Connector (X109)
PRODUCT MANUAL SANTINO LT core 6.11 Display Connector (X109) Name Description Level VLEDN Not connected VLEDP Not connected Ground VDD_LCD Supply display 3.3 V +- 3% LCD_R0 Data red LSB LCD_R1 Data red 1 LCD_R2 Data red 2 LCD_R3 Data red 3... -
Page 21: Backlight Connector (X117)
PRODUCT MANUAL SANTINO LT core 6.12 Backlight Connector (X117) Name Description Level VLEDP Anode VLEDN Cathode Header: JST BM02B-SRSS Plug: JST SHR-02V-S-B with crimp contact JST SSH-003T-P0.2... -
Page 22: Keypad / I²C (X110)
PRODUCT MANUAL SANTINO LT core 6.13 Keypad / I²C (X110) Keypad/SPI/I²C, multiplexed Description Name Level Default Mode Power Supply 5.0 V Ground PCK0_GPIO6_7 Keypad row 0 PCK1_GPIO6_8 Keypad column 0 PCK2_GPIO6_9 Keypad row 1 PCK3_GPIO6_10 Keypad column 1 3.3 V... -
Page 23: Speaker Internal (X10)
PRODUCT MANUAL SANTINO LT core 6.14 Speaker Internal (X10) Name Description Level Speaker + Parallel to X9 1.5W RMS 8 Ohm Speaker - Header: JST B2B-ZR-SM4-TF Plug: ZHR-2 with crimp contacts SZH-003T-P0.5... -
Page 24: Battery
SANTINO LT core Battery Battery Specifications The internal baseboard is equipped with a Primary Lithium battery (type CR1220), which has a typical lifetime of 8 years. Type SECO Northern Europe Article Number Battery type CR1220 010-0059R Manufacturer Model Varta CR1220 Alpha 3 Manufacturing Ltd. -
Page 25: Replacement Of The Internal Battery
PRODUCT MANUAL SANTINO LT core Replacement of the Internal Battery The internal battery is placed as per figure below. The device shall be handled by authorized and skilled personnel only. Danger of electric hazard! First before removing battery, please make sure that the unit is completely disconnected from any power supply, direct or indirect. -
Page 26: Annex A: Hardware Revision Information
This document is applicable for all products listed below. Please note that customized variants might possibly not support all features listed herein. Additional features are documented in specific attachments. Platform Article Number Marking on PCB SANTINO LT core x1 900-3371R 0597 SANTINO LT V1.1 SANTINO LT core x2l 900-3459R 0597 SANTINO LT V1.1... -
Page 27: Annex B: Assembly Options
PRODUCT MANUAL SANTINO LT core Annex B: Assembly Options Wi-Fi / Bluetooth Some appliances require a wireless network connection. To be more flexible with regard to future Wi-Fi standards and regulations, we decided not to assemble this functionality directly onto the single-board-computer. -
Page 28: Annex C: Guidelines And Standards
Supplier Declaration – Directive EG 1907/2006 REACH SECO Northern Europe is manufacturer of electronic products, thus - in the sense of REACH - we are so called „downstream users“. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. -
Page 29: Seco Northern Europe Conformity Statement
These solutions are offered exclusively as OEM products. They do not include any application software that is intended for the end user. Therefore, we do not make any EU declarations of conformity in the name of SECO Northern Europe GmbH and do not provide the products with the CE mark. -
Page 30: Annex D: Common Documentation
If the product has been returned with or without prior notice and no failure or malfunction can be detected or the failure or malfunction is caused by inappropriate handling or the device has been returned after expiry of warranty period, SECO Northern Europe reserve the right to charge the user for repair or replacement. -
Page 31: Field Of Application
If you intend to use these products in applications as quoted in (II) we highly recommend a personal contact with our consultants and/or technical sales team. (I) Recommended application areas for SECO Northern Europe embedded systems Even for these applications, we recommend to get in contact with our technical sales team. We offer a wide range of support, even at an early stage of evaluation and/or design-in phase. -
Page 32: Annex E: Technical Support
SANTINO LT core Annex E: Technical Support Before contacting the SECO Northern Europe support team, please try to help yourself by the means of this manual or any other documentation provided by SECO Northern Europe or the related websites. If this does not help at all, please feel free to contact us. -
Page 33: Annex F: General Information
For exact technical drawings please refer to our sales team or product manager All other product or service names are the property of their respective owners. All rights reserved. Products subject to technical changes, improvements and misprints. © 2022 SECO Northern Europe GmbH...