Advertisement
Single Channel
LFP Interface
Dual Channel
LVDS Advanced Options
See Submenu
LFP Default Brightness (%)
0 ÷ 100
LFP Max ACPI Brightness (%)
0 ÷ 100
Integrated Graphics Device
Disabled / Enabled
Primary Display
Auto / IGD / PCIe
RC6(Render Standby)
Disabled / Enabled
Disabled / LITE Mode /
PAVC
SERPENT Mode
Power Management Lock
Disabled / Enabled
DOP CG
Disabled / Enabled
GTT Size
1MB / 2MB
Aperture Size
128MB / 256MB / 512MB
64M / 96M / 128M / 160M /
192M / 224M / 256M / 288M /
IGD - DVMT Pre-Allocated
320M / 352M / 384M / 416M /
448M / 480M / 512M
IGD - DVMT Total Gfx Mem
128M / 256M / MAX
IGD Turbo
Auto / Enabled / Disabled
IGD Thermal
Disabled / Enabled
Spread Spectrum clock
Disabled / Enabled
Auto
Backlight Control
PWM- Inverted
PWM-Normal
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Allows configuration of LVDS interface in Single or Dual channel mode
LVDS Advanced Options Configurations
LFP Default brightness percentage. Valid values are in the range 0-100, where 0 means backlight OFF.
This setup configuration, during the BIOS boot, is valid only with a single LFP connected (no multi-monitor).
Maximum ACPI brightness percentage allowed with an ACPI aware OS
Enabled: enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor.
Disabled: always disable IGD
Select which of IGD or external PCI Graphic Controller should be the Primary display (please notice that the
external PCI bus is managed by the Bay Trail's PCIe interface, hence the meaning of the menu options)
Permits to enable the render standby features, which allows the onboard graphics entering in standby
mode to decrease power consumption
Allows enabling the hardware acceleration of decoding of Protected Audio Video streams.
When LITE is Control, choosing is LITE encryption or SERPENT encryption has to be used.
Enable / Disable Power Management Lock
Enable / Disable DOP Clock Gating
Select the GTT (Graphics Translation Table) Size
Use this item to set the total size of Memory that must be left to the GFX Engine
Select DVMT5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphic Device
Select the size of DVMT (Dynamic Video Memory) 5.0 that the Internal Graphics Device will use
Enable or Disable IGD Turbo mode
Enabled or disable Thermal Control of IGD
Enable or disable LVDS Spread Spectrum Clock
Backlight control setting
53
Advertisement
