Advertisement
4.3 Advanced menu
Menu Item
Boot Configuration
PCI Express Configuration
USB Configuration
Audio Configuration
LPSS & SCC Configuration
Miscellaneous Configuration
Security configuration (TXE)
Video Configuration
Chipset Configuration
SATA Configuration
Console redirection
ACPI Table / Features Control
Super I/O Configuration
Virtual Super I/O Configuration
INT/IRQ Configuration
LPC to ISA Bridge Configuration
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Options
Description
See submenu
Configures settings for Boot Phase
See submenu
PCI Express Configuration Settings
See submenu
Configures USB Section
See submenu
Configures Audio Section
See submenu
Configures LPSS (Low-Power Sub-System, i.e. DMA, PWM, UART and I2C interfaces) and SCC (Storage
Control Cluster) devices
See submenu
Enable / Disable Misc. features
See submenu
Trusted Execution Environment Security Configurations
See submenu
Configures the options for video section
See submenu
Configure Chipset's parameters
See submenu
Select the SATA controller and hard disk drive type installed in the system
See submenu
Console redirection settings
See submenu
Configures the parameters for ACPI management
See submenu
Super I/O Setup Configuration Utility
See submenu
Install legacy UARTs on ACPI aware OS
See submenu
INT/IRQ Configuration
See submenu
LPC to ISA Bridge Configuration
46
Advertisement
