Advertisement
2.2 Technical Specifications
SOC
®
Intel
Atom E3845, Quad Core @1.91GHz, 2MB Cache, 10W TDP
®
Intel
Atom E3827, Dual Core @1.75GHz, 1MB Cache, 8W TDP
®
Intel
Atom E3826, Dual Core @1.46GHz, 1MB Cache, 7W TDP
®
Intel
Atom E3825, Dual Core @1.33GHz, 1MB Cache, 6W TDP
®
Intel
Atom E3815, Single Core @1.46GHz, 512KB Cache, 5W TDP
Intel
®
Celeron
®
J1900, Quad Core @2.0GHz, 2MB Cache, 10W TDP
Intel
®
Celeron
®
N2930, Quad Core @1.83GHz, 2MB Cache, 7.5W TDP
®
®
Intel
Celeron
N2807, Dual Core @1.58GHz, 1MB Cache, 4.3W TDP
Memory
Soldered down DDR3L memory
E3845, E3827, J1900, N2930: up to 8GB Dual-Channel DDR3L 1333MHz
E3826: up to 8GB Dual-Channel DDR3L 1066MHz
N2807: up to 4GB Single-Channel DDR3L 1333MHz
E3825, E3815: up to 4GB Single-Channel DDR3L 1066MHz
Graphics
®
Integrated Intel
HD Graphics 4000 series controller
Dual independent display support
HW decoding of H.264, MPEG2, MVC, VC1, VP8, MJPEG formats
HW encoding of H.264, MPEG2 and MVC formats
Video Interfaces
VGA standard analog video interface
18/24 bit single/dual channel LVDS interface (VESA and JEIDA color mapping
compatible)
Video Resolutions
CRT Interface:
up to 2560 x 1600 @ 60Hz
LVDS interface:
Up to 1920 x 1200 @ 60Hz
Mass Storage
Optional eMMC disk soldered on board
2 x external S-ATA or 2 x P-ATA or 1x P-ATA + 1 x S-ATA channels (factory
options)
μSD Card Slot
USB
4 x USB 2.0 Host ports
Networking
Gigabit Ethernet controller, makes available a 10/100Mbps Ethernet interface
Audio
HD Audio codec, Realtek ALC262
Serial Ports
2 x Serial ports (TX/RX/RTS/CTS signals, TTL interface)
Other Interfaces
PCI Bus rel. 2.3 compliant, realised using a PCI-e to PCI bridge
ISA Bus, realised using a LPC to ISA bridge
LPT interface shared with Floppy Disk Drive interface
PS/2 mouse and keyboard interface
I2C Bus
SM bus
Watch Dog timer
Power Management Signals
Power supply voltage: +5V
± 5% and + 5V
DC
Operating temperature:
0°C ÷ +60°C (commercial version) **
"
Dimensions: 114 x 95 mm (4.49
x 3.74
** Temperatures indicated are the minimum and maximum temperature that
the heatspreader / heatsink can reach in any of its parts. This means that it is
'
customer
s responsibility to use any passive cooling solution along with an
application-dependent cooling system, capable to ensure that the
heatspreader / heatsink temperature remains in the range above indicated.
Please also check paragraph 5.1
(optional)
SB
"
)
Advertisement
