Single board computer with intel atom x series, intel celeron j / n series, intel pentium n series (formerly apollo lake) processors on picoitx form factor (68 pages)
Preliminary information Device description The SYS-B68-IPC device is a single board computer enclosed in a metal box with a heat sink. The SYS-B68-IPC device integrates a single standard NUC board based on the eighth generation Intel® Atom, Pentium® and Celeron® family of System-on-Chips (SOC) previously coded as Apollo Lake, a series of SOC Dual / Quad with a set of 64 bit instructions.
SYS-B68-IPC Recipients This manual is intended for ordinary people and installers (expert users). Warranty The warranty shall be voided in the event of: failure to comply with safety regulations; • tampering with the device; • changes to the safety conditions established by the Manufacturer in the device •...
2020 Device identification plate The device is equipped with an identification plate located on the side. The plate features the device identification information to be reported to Seco S.p.A. if necessary, as shown in the table: SYS-B68-IPC-XXXX-1XXX-I3 - Code that identifies the Client.
Caution! It is strictly forbidden to remove the identification plate and/or replace it with other plates. Technical specifications SYS-B68-IPC device hardware specifications The table below features the board hardware specifications: Intel® Atom™ x7-E3950 Quad Core @1.6 GHz (Burst 2.0GHz), 2MB L2 Cache, 12W TDP Intel®...
Page 7
SYS-B68-IPC Preinstalled OS (factory options): Microsoft Windows 10 IoT entry Linux Ubuntu 64-bit Operating System Available on request: Wind River Linux (64-bit) Yocto (64-bit) Android (planning) miniDP++ to HDMI adapter Optional Accessories Customised bracket for VESA panel mount Operating temperature in user -40°C ÷...
, which is always updated and available, even in later versions. ipc.html Reference directives SECO S.p.A. places the device on the market, equipping and providing it with: CE marking Declaration of Conformity FCC - Part 15 Certification* ISED Certification**...
Page 9
SYS-B68-IPC Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
SYS-B68-IPC Safety devices Warnings Caution! It is the user’s responsibility to apply preventive and protective measures, in accordance with the legislation of the country of installation and use of the device. Caution! Only use CLASS 2 power supply with double isolation output and LPS operation (see EN 60950-1 clause 2.5) or ES1 PS2 output (see EN 62368-1) as per...
SYS-B68-IPC Safety pictograms affixed to the device The device is provided with adhesive labels and safety plates, as indicated in the table below. PICTOGRAM DESCRIPTION Danger of hot surfaces! Skin burns in case of contact Do not touch with your hands or other body parts...
SYS-B68-IPC Characteristics and components of the device The SYS-B68-IPC device is a single board computer enclosed in a metal box with a heat sink. Caution! When running, the device can reach very high temperatures, causing the danger of burns when in contact with the heat sink.
SYS-B68-IPC Components Jack input Jack output USB ports ON/OFF microphone audio RESET button Information subject to change. Please visit to find the latest version of this manual. www.seco.com Page.12 of 16...
Page 14
SYS-B68-IPC DP++ port Ports USB ports Antenna Power Antenna connection for Ethernet supply connection for radio module radio module input connection connection Dual Dual independent independent display display Information subject to change. Please visit to find the latest version of this manual.
Positioning the device in environments that do not correspond to those indicated shall render the warranty null and void for the parts to be replaced. SECO S.p.A. shall not be held liable if these instructions are not complied with. Information subject to change. Please visit to find the latest version of this manual.
SYS-B68-IPC Installing the device In order to install the device, make sure that the incoming electrical power supply complies with the following values: Only use power supply that are certified according to safety standards, pursuant to the regulations in force in the country of use (EN 62368).
Page 17
SYS-B68-IPC internal diameter 4.3mm external diameter 16mm width 1.6mm compliant with ISO 7089 in points (A), indicated in the figure; Proceed to connect the electric supply to the device. Once inserted, turn the connector clockwise in order to lock it in place;...
SYS-B68-IPC Versions available The SYS-B68-IPC device is available in different versions that integrate various configurations of the single electronic board “B68” e-NUC. Below are the tables with the main configurations of the device: CPU Version Version Description SB68-1xxx-xxxx-C0 A0 Option CPU Apollo Lake -Intel Celeron N3350...
Page 19
SYS-B68-IPC RAM Version Version Description SB68-x1xx-xxxx- Option RAM 1GB (1 8Gb Chip) Single CH0 (A0)(C0) SB68-x2xx-xxxx- Option RAM 1.5GB (1 12Gb Chip) Single CH0(A1)(C0) SB68-x3xx-xxxx- Option RAM 2GB (1 16Gb Chip) Single CH0 (A2)(C0) SB68-x4xx-xxxx- Option RAM 2GB (2 8Gb Chips) Double CH0 + CH1 (A0)(C1)