Advertisement
3.1 Introduction
®
According to ETX
specifications, all interfaces to the board are available through two 220 pin connectors, for a total of 440 pin. Simplifying the terminology in this
documentation, the primary connector is called A-B and the secondary C-D, since each one consists of two rows.
In addition, a Fan connector has been placed on one side of the board, in order to allow an easier connection of active heatsinks to the module.
Please be aware that, depending on the configuration purchased, the appearance of the board could be different from the following pictures.
TOP SIDE
Optional SATA
connectors
Ext. FAN
Connector
ETX-A61
ETX-A61 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
BOTTOM SIDE
ETX connector
X2
ETX connector
X1
ETX connector
X4
ETX connector
X3
19
Advertisement
