Sending Equipment To Viavi For Calibration, Maintenance, Or Repair; Guarantee Conditions; Recycling Information - Viavi SmartOTDR Mainframe User Manual

Sending equipment to VIAVI for calibration,
maintenance, or repair
VIAVI Solutions is a single-source supplier for all of your factory and on-site test equip-
ment repair, warranty, maintenance, and calibration service needs.
Please complete the on-line RMA form to obtain authorization prior to shipping your
instrument to VIAVI for repair or calibration. Do not ship the equipment until you receive
the Return Authorization (RA) number from VIAVI. You may use this number to track
your equipment during repair, calibration, or upgrade.

Guarantee conditions

Any repair operation supervening within the guarantee period of the instrument will be
carried out at the expense of Viavi. However, for any sub-assembly upon which work has
been carried out otherwise than by VIAVI Service Centers, the cost of a replacement
sub-assembly will be invoiced.

Recycling Information

VIAVI recommends that customers dispose of their instruments and peripherals in an
environmentally sound manner. Potential methods include reuse of parts or whole prod-
ucts and recycling of products components, and/or materials.
Waste Electrical and electronic Equipment
(WEEE) Directive
In the European Union, this label indicates that this product should not
be disposed of with household waste. Il should be deposited at an appro-
priate facility to enable recovery and recycling.
User Manual
Chapter 11 Maintenance and Troubleshooting
7SMART102 Rev006
Recycling Information
125