Integrated Patch Cord Microscope (Pcm) - Viavi SmartClass FBP-HD4iP User Manual

Click here for more details on the Viavi SmartClass™ OLP-82P Digital Video Display Kit with Patch Cord, Probe Scope & High-Power Optical Power Meter
Capture button
Focus control
Magnification
control
FBP-HD4i/HD4iP / OLP-82/82P
Contact the professionals at Fiber Optic Center for a quote or to get more details.

Integrated Patch Cord Microscope (PCM)

Certain SmartClass Fiber devices are also configured with an
additional on- board PCM, which allows users to inspect both
ends of a fiber connection much faster than with a single probe
microscope.
Fig. 16: FMAX Series Adapters for the PCM
NOTE: SmartClass Fiber devices with the PCM use FMAX series adapters
to ensure consistent and accurate inspection for a wide variety
connectors and applications. All PCM configurations ship with
an included 2.5 mm interface. Kitted configurations include
additional adapters.
Instantly captures and analyzes fiber image
Allows the user to adjust focus manually of the live fiber end
face image on the display.
Allows the user to switch between LOW and HIGH
magnifications of the fiber end face image.
To activate PCM:
1. Select the appropriate FMAE adapter that corresponds to the
connector type and side being inspected and attach to PCM.
2. Press the HOME key, then select the INSPECT (PCM) button.
focenter.com • 508-992-6464 | (800) 473-4237 •
23 Centre Street • New Bedford, MA 02740 USA
5 I
NSPECTION
I P C M
NTEGRATED ATCH ORD ICROSCOPE
sales@focenter.com
(PCM)
33
Product data subject to change
without notice.