Viavi SmartOTDR Getting Started Manual

Laser safety
The provisions contained in two standards defi ne the safety procedures to be
observed both by users and by manufacturers when utilizing laser products:
- EN 60825-1: 2001 - Safety of laser products – Part 1: Classifi cation of prod-
ucts, requirements and user guidelines.
- FDA 21 CFR § 1040.10 - Performance standards for light-emitting products
- Laser products.
Due to the range of possible wavelengths, power values and injection charac-
teristics of a laser beam, the risks inherent in its usage vary. The laser classes
form groups representing different safety thresholds.
- VFL option: Laser Class 2.
Due to the reduced dimensions of the optical modules, it is not possible to
attach the required warning labels to them. In line with the provisions of Article
5.1 of the EN 60825-1 standard, the laser class identifi cation labels are shown
below:
Ref. stan-
dard
Class 2
DO NOT STARE INTO BEAM
The user must take the necessary precautions concerning the optical
outputs of the instrument and follow the manufacturer's instructions.
AC/DC power supply safety
Always use the proper adaptable plug to connect the power supply
to an electrical outlet. Viavi is not responsible for direct or indirect
!
damage including damage to persons or property if the power
supply is not use correctly. For assistance using one of the Viavi
supplied adapters (your specifi c regional adapter may not be avail-
able) please refer to the user manual.
SAFETY INFORMATION
EN 60825-1, Edition 1.2,
2001-08
LASER RADIATION
CLASS 2 LASER PRODUCT
SmartOTDR
GETTING STARTED MANUAL
FDA21CFR§1040.10
CAUTION
LASER RAD IATION - DO NOT STARE
INTO BEAM
CLASS II LASER PRODUCT