Chapter 7 Connectivity
Remote Control
Testing connection
Before entering the Access code to activate the application, the connection to internet
can be tested from displayed screen.
1
Open the Smart Access Anywhere application on PC
2
Press
The test is automatically launched
3
Press
Once completed, the results for connection display:
Figure 56
Test results
The screen displays, in two different tables:
•
the Upload and Download speed (in Kbyte/s) from Device to server.
•
the Latency between Device and server (in ms).
4
Press
5
If connection is valid, enter the access code and establish connection (see
"Launching the SmartAccess Anywhere application" on page 63 - "On the distant
PC" on page
72
button
to display logs in real time
to delete the current table, and retest connection if wished.
64).
User Manual
7SMART102 Rev006