Transferring Files To/From A Pc Via Wifi Or Ethernet - Viavi SmartOTDR Mainframe User Manual

Chapter 7 Connectivity
Remote Control
Figure 58 Confirmation of file receiving
WARNING
The files stored in bluetooth-inbox will be lost once the SmartOTDR is
switched off. Copy/Paste the files to keep toward another storage
media (disk, usb key...).

Transferring files to/from a PC via WIFI or Ethernet

Once connection is established between the Platform and the PC:
1 On the PC, use an FTP client, and access to internal memory via an internet
browser page (I.E, Mozilla Firefox...).
2 In the address bar, type the following address (10.33.16.229 being the IP
address of the SmartOTDR defined when the connection was configured):
ftp://mts1000:JDSU@10.33.16.229/disk/
This allows to access to internal memory.
ftp://mts1000:JDSU@10.33.16.229/usbflash/
This allows to access to the contents of the USB memory stick connected to the
SmartOTDR.
3 If an identification is required, enter:
– User name: mts1000
– Password: JDSU
The PC then displays the contents of the internal memory or of the USB memory
stick from the SmartOTDR.
74 User Manual 7SMART102 Rev006