Powering Off The System; Delivering A Shutdown Command On The Smartlogger - Huawei LUNA2000-200KWH-2H1 Smart String ESS User Manual

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
12.1 Delivering a Shutdown Command on the
SmartLogger
Prerequisites
The system has connected to the grid and is running properly.
Procedure
Step 1 Log in to the SmartLogger WebUI, choose Maintenance > Connect Device, and
click
Figure 12-1 Shutdown command
Step 2 Choose Device Monitoring > PCS > Running Info. Check the device status, active
power, and DC voltage to verify that the shutdown is successful.
Step 3 Choose Device Monitoring > CMU > Running Info. Check the rated power and
total output voltage of the rectifier to ensure that the shutdown is successful.
Issue 02 (2023-02-28)
12
to shut down the Smart PCS and Smart Rack Controller.
Copyright © Huawei Digital Power Technologies Co., Ltd.

Powering Off the System

12 Powering Off the System
148