Installing Dc Power Cables - Huawei LUNA2000-200KWH-2H1 Smart String ESS User Manual

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Step 5 Install the protective cover delivered with the product, connect a ground cable to
the protective cover on the left or right side, and bind the cable.
Figure 8-9 Connecting a ground cable
----End

8.5 Installing DC Power Cables

Prerequisites
The DC power cables have been pre-buried.
Procedure
Step 1 Remove the baffle plate in front of the power distribution area.
Step 2 Route the DC power cables through the cable hole at the bottom and connect the
cables to the DC circuit breaker.
Issue 02 (2023-02-28) Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Installing Cables
107