Installing Cables For The Rack Mounted Fire Extinguishing System; Installing Battery Pack Cables - Huawei LUNA2000-200KWH-2H1 Smart String ESS User Manual

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
8.2 Installing Cables for the Rack Mounted Fire
Extinguishing System
Step 1 Take out the reserved cables and install them to the rack mounted fire
extinguishing system.
Ensure that the cables are correctly installed. If a fire occurs when cables are not
connected or incorrectly connected, the ESS cannot actively extinguish the fire.
Ensure that the cables are correctly installed. If a fire occurs when cables are not
connected or incorrectly connected, the ESS cannot actively extinguish the fire.
Figure 8-1 Connecting cables
----End

8.3 Installing Battery Pack Cables

Step 1 Install copper bars for battery packs, and connect the battery rack general output
power cable and black start cable.
Issue 02 (2023-02-28)
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Installing Cables
101