Installing Rack Controller Cables - Huawei LUNA2000-200KWH-2H1 Smart String ESS User Manual

LUNA2000-200KWH-2H1 Smart String ESS
User Manual

8.4 Installing Rack Controller Cables

Step 1 Remove the decorative cover and maintenance compartment cover from the rack
controller.
Figure 8-5 Removing covers
Step 2 Connect the preinstalled cable to the BAT/BUS ports. Magnetic rings are delivered
with the product.
● The black magnetic ring is installed on the left side of the rack controller, and
● Do not remove the cover from an unused pagoda connector.
Figure 8-6 Connecting cables
Issue 02 (2023-02-28)
NO TICE
the green magnetic ring is installed on the right side of the rack controller.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Installing Cables
105