Huawei LUNA2000-200KWH-2H1 Smart String ESS User Manual page 149

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
6.
7.
Issue 02 (2023-02-28)
Parameter
Automatic SOC
calibration
Start time
To
Charge/
Discharge
Repeated
Connect to a Huawei network management system (NMS).
Figure 10-21 Huawei NMS
Connect to a third-party management system. Select IEC104.
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 SmartLogger Web-based Deployment
Description
▪
Enabled: Automatic SOC calibration is enabled. If
the total charge and discharge energy reaches
the threshold or the calibration function has not
been triggered for 30 days, the SOC automatic
calibration is performed. During calibration, the
cut-off SOC settings will be ineffective and the
response of the charge/discharge power may be
impacted temporarily.
▪
Disabled: Automatic SOC calibration is disabled.
Set the Charge/Discharge time. A maximum of 14
time segments can be set. You can set a cycle by
week by clicking the buttons corresponding to Mon.
through Sun. in the Repeat box. The buttons are
blue by default, indicating selected. After you click
it, the button turns gray.
141