Installation
3.5 Unpacking
•
•
•
•
•
A=Stand cross-bar
B=Leg
C=Pallet
D=Handtruck
Packaging must be disposed of or recycled in accordance with local regulations.
WD-B 500 - WD-B 900
Check against the delivery note that all the units have been delivered.
Remove the packaging, but leave the pallet and any transport supports in
place.
Inspect the machine for any transport damage.
Lift the section at both ends using a handtruck. Screw down the legs (B) so
that they extend below the bottom of the pallet (C). Lower the section. Split
the pallet and take it away.
If the section should need to be lifted again from the short sides, a wooden
runner should be placed under the cross-bar (A) on the section stand.
A
B
9
C
Rev. 4.0 (201208)
A
Uppackn
D