Table of Contents
Advertisement
Instructions for use
4.3.3 Cleaning and checking each week or as required
Weekly cleaning should be more thorough than daily cleaning. In addition to the
daily cleaning measures, follow these instructions:
•
•
•
•
WD-B 500 - WD-B 900
Clean the washer arms (19). Remove the lower washer arms by pushing
the lock on the front of the washer arm down and pulling the washer arm
out. Remove the upper washer arms by turning the knob beneath the front
of the washer arms a half turn. Pull the washer arm down slightly and out.
Brush and rinse the inside of the washer arms and clean the nozzles.
Check and clean the rinse nozzles (18, 20, 26).
Check that the overload switch for the feed is working by attempting to hold
the belt still for a few seconds. If the switch does not activate (the belt
should stop), it must be adjusted immediately.
Refit all cleaned components.
36
Rev. 4.0 (201208)
Advertisement
Table of Contents
