Table of Contents
Advertisement
Installation
3.4 Marking of sections
The machine is normally divided into two sections. In some cases the machine
can be delivered in more than two sections. The installation instructions describe
the assembly of a machine that has been split into two sections. Regardless of
the number of sections, the assembly of all sections is undertaken in the same
way. The sections are marked on the outside of the packaging with the following
information.
•
•
•
Section marking on the packaging
WD-B 500 - WD-B 900
Numbering 1-2. Section 1=infeed section with washing zones, Section
2=outfeed section with final rinse and drying zone.
Arrows which indicate the feed direction of the machine.
Marking of the front. FRONT=Front.
1
FRONT
8
Rev. 4.0 (201208)
2
FRONT
sektmärkn
Advertisement
Table of Contents
