Table of Contents
Advertisement
Instructions for use
4.3.2 Daily cleaning
Cleaning the inside
•
•
•
•
•
•
•
•
•
Filter for final rinse
WD-B 500 - WD-B 900
Switch the machine off by pressing button (12).
Empty the machine by turning the outlet seals (27) a quarter of a turn.
Clean the filters (24), all the curtains (21), the outlet seals (27) and the rinse
nozzles (18, 20, 26). Never leave the outlet seals so that the rubber sleeve
rests on a surface. The sleeve can become deformed leading to the risk of
water leakage in the tanks.
Clean the washer arm nozzles (19).
Clean the doors. Wipe the rubber strips on the doors which are fitted at the
top of the back of the doors.
Rinse all the inside surfaces of the machine and clean the tanks.
Finally, clean the strainer (29).
Empty the final rinse tank and clean the filter (28). The filter is placed be-
hind the lower door at the outfeed end. Unscrew the cover and remove the
filter. Clean the filter. Make sure that the cover seal provides a good seal
when refitting.
Refit the components and leave the doors open.
2
3
34
1
4
5
Rev. 4.0 (201208)
Rec_filter
Advertisement
Table of Contents
